Patriot H8412-B Headers

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
A

AOCUSNRET

Well-known member
7173 Mustang Supporter Member
Joined
Jan 27, 2016
Messages
88
Reaction score
0
Location
Corpus Christi, TX
My Car
1973 Mach 1 with 351C.
I have a set of Patriot Headers H8412-B that I purchased a couple of years ago that I am just now getting around to installing. The passenger side seems to point inward more than the other side. Has anyone experienced this with this brand? I was expecting them to be point straight back. If anyone has these installed on their car that could share a pic or two, that would be appreciated.

Thanks all.
 
I cannot provide any useful info on that set of headers, but a long time ago, this was discussed, as part of a good overall engine build on this forum. For what it’s worth:

https://7173mustangs.com/threads/351-c-2v-upgrade-quick-dirty.23822/
At least you might ask the originator on the recommendation if he has experience, if he’s still around.
 
AOCUSNRET,
I have Patriot H8414-B on my 71fb-Cleveland 4V with PS and they fit well with Toploader/ Tremec TKX with stock bellhousing and C4.
no ps bracket needed.
The only odd thing is the rh header does point 15 degrees inward.
I did have to purchase a 15 degree mandrel bend pipe to make my X pipe work well.
They don't hang too low and I am very pleased with them.
Been on my car for about 5 years now and no rust.
Boilermaster
 

Similar threads

C
Installation of 429/460 Hooker headers
Replies
16
Views
1K
fuzzyflash
fuzzyflash
tfowler9
Jacobs Ignition System
Replies
12
Views
914
tfowler9
tfowler9
Mark Jones
First Start Attempt
2
Replies
36
Views
2K
Mark Jones
Mark Jones
Steve McMahan
Hood bump stops in cowl
Replies
6
Views
532
Steve McMahan
Steve McMahan
RC92234
Almost ready for re-upholstery, but I have some questions
Replies
4
Views
437
RC92234
RC92234

Latest posts

Back
Top