351 cleveland heads

73 SGM Mach · Sep 23, 2024

Can anyone look at these pictures and tell if these are 4v or 2v heads? I think they are closed chamber and they have some date codes. I have requested additional pictures of the codes under the intake ports. Seller wants $1200 for the pair is that a good price? Thanks for the help!
Jeff

Sheriff41 · Sep 23, 2024

They are D0AE-N 4V closed chamber heads. I would consider $1,200 on the high side for heads that need machine shop servicing. Have these been checked for cracks? Have the original valves been replaced? Guides and seats? Lots to consider before shelling out the asking price, from my point of view.

Hemikiller · Sep 23, 2024

$1200 is a lot for a set of heads that needs a pile of money in parts and machine work. At that price point, aluminum heads make more sense.

Cleveland Crush · Sep 23, 2024

Agree with Sheriff & HK...proceed with caution on those heads. They do appear to have highly
undesirable multi-groove factory valves.

Stanglover · Sep 23, 2024

I had a set of similar heads I bought for $500 Cdn. or about 450 US at the time. I also bought a set of bare GA heads that were crack checked for 200 Cdn.
If they're selling for 1200 now, damn I wish I'd kept em!
The guy's a dreamer!

tony-muscle · Sep 23, 2024

I agree with the above. I have seen similar heads in the Facebook 713 group going for $400-$500.

73pony · Sep 23, 2024

Very high price. There is a guy local to me selling a set of fresh built 4v closed chamber heads for $600.

73 SGM Mach · Sep 24, 2024

Thanks all for the input! I dont know with todays markets if that was resonable or not. NOT!

Ryunker · Sep 24, 2024

73 SGM Mach said:
Thanks all for the input! I dont know with todays markets if that was resonable or not. NOT!

To me that is 100% insane. These are desirable to a very small market in the scope of all vintage cars. A pair of heads that still need to be gone thru is about $400 a pair, the machine shops generically expect $500 a head to get ready for use aside from parts that may be needed. Years ago I purchased a bare block and a set of those same heads complete were just thrown in as a gift.

Zach · Sep 24, 2024

1200 + machine work and assembly is a little steep, at what price do you just opt for some aluminum heads. Was in a similar situation so I went with 3v chis and ended up putting double the original cash down the drain

73 SGM Mach · Sep 25, 2024

Zach said:
1200 + machine work and assembly is a little steep, at what price do you just opt for some aluminum heads. Was in a similar situation so I went with 3v chis and ended up putting double the original cash down the drain

3v CHI heads no good?

ib4stangs · Sep 26, 2024

This $700 set will be at Fall Carlisle, Oct 2...

https://harrisburg.craigslist.org/pts/d/carlisle-351c-4v-closed-chamber-hi-po/7781982642.html

73 SGM Mach · Sep 26, 2024

Zach said:
1200 + machine work and assembly is a little steep, at what price do you just opt for some aluminum heads. Was in a similar situation so I went with 3v chis and ended up putting double the original cash

ib4stangs said:
This $700 set will be at Fall Carlisle, Oct 2...

https://harrisburg.craigslist.org/pts/d/carlisle-351c-4v-closed-chamber-hi-po/7781982642.html

Thank you but I wont be there and I would be stuck at close to the same price for shipping.

73 SGM Mach · Sep 28, 2024

73 SGM Mach said:
3v CHI heads no good?

Zach said:
1200 + machine work and assembly is a little steep, at what price do you just opt for some aluminum heads. Was in a similar situation so I went with 3v chis and ended up putting double the original cash down the drain

Zach
Can you tell me more about the 3v CHI heads? Im interested to see if you like or dont like them?

Zach · Sep 29, 2024

73 SGM Mach said:
Zach
Can you tell me more about the 3v CHI heads? Im interested to see if you like or dont like them?

3V CHIs are regarded as the best aftermarket heads, they are just really expensive and can be hard to get.

I don’t have them yet but I know some people in here have them.

1972mach1mustang · Sep 29, 2024

I had my choice of chi or tfs. I went with tfs 225's

351 cleveland heads

Help Support 7173Mustangs.com:

73 SGM Mach

Well-known member

Attachments

Sheriff41

Well-known member

Hemikiller

Well-known member

Cleveland Crush

Well-known member

Stanglover

Well-known member

tony-muscle

Well-known member

73pony

Well-known member

73 SGM Mach

Well-known member

Ryunker

Well-known member

Zach

Well-known member

73 SGM Mach

Well-known member

ib4stangs

Mustang Nut

73 SGM Mach

Well-known member

73 SGM Mach

Well-known member

Zach

Well-known member

1972mach1mustang

Member

Similar threads

Latest posts

351 cleveland heads

Help Support 7173Mustangs.com:

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Mustang Nut

Well-known member

Well-known member

Well-known member

Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!