I recently replaced the valve covers on the 72 coupe, with exact matches from SD. The issue I am having is that I cannot locate the correct grommet or PCV valve setup that fits the the passenger side PCV port. Every D-shaped rubber grommet out there is way too small for this hole. CJ said it was a G3...I order it and it was not even close. Has anyone bought these and know what grommet works for this hole? The overall hole is 1.25 x 1.25 with the standard 5/8 access hole.
My old covers which were identical to these but had a circular port hole that was closer to the end of the cover. Somewhere it appears this was updated, but I cannot find this damn grommet to put the PCV elbow into. Any insight or link would be appreciated.
By the way, I owe a shoutout to Sheriff- I followed your taillight modification thread from awhile back with the LED's and links to the parts. The lights came out great. Thanks for the great info.
My old covers which were identical to these but had a circular port hole that was closer to the end of the cover. Somewhere it appears this was updated, but I cannot find this damn grommet to put the PCV elbow into. Any insight or link would be appreciated.
By the way, I owe a shoutout to Sheriff- I followed your taillight modification thread from awhile back with the LED's and links to the parts. The lights came out great. Thanks for the great info.
