Search results

7173Mustangs.com

Help Support 7173Mustangs.com:

  1. R

    Converting to manual trans

    I used a hydraulic RAM heavy Duty clutch, with Malwood all in one pedal assembly.
  2. R

    Converting to manual trans

    https://7173mustangs.com/threads/4r70w-is-going-out-tko500-is-going-in.40010/post-417891 Some info :-)
  3. R

    FMX to 4r70w swap

    I have SPC upper controm arm tires are 235/45/18 no rubs at all.
  4. R

    Lower control arm Poly Bushing

    Here is the finished product, Boxed all around and 1 9/16 bushing from Energy suspension. The old shell is welded in. Polybushing are wrapped in telefon tape before putting them in. Steps: Press out the old Bushing with shell Drill out and press out the center of the bushing leaving the edges...
  5. R

    Lower control arm Poly Bushing

    Yes My thought to, Well Il go hunting for some others. I think the 1 9/16 are the correct ones
  6. R

    Lower control arm Poly Bushing

    Hi I thought of changing the lower control arms, and box the new ones. Also I would like to get some poly bushings in. I bought what I thought was right but this is the fitment. The shell is from the old arm. Will It compress and work when torqued down ? I think there is to much play. The...
  7. R

    Rainy Car show 1 pick

    Thanks all for great comments :-) The microfiber towels worked hard to dry her in the garage.
  8. R

    Rainy Car show 1 pick

  9. R

    Special custom built exhaust

    thanks, but the gas in Sweden is ridiculous expensive :)
  10. R

    Special custom built exhaust

    Here is a clip from the dashcam. The sound on the mic is not so good when recording. Its very smal acceleration :)
  11. R

    Special custom built exhaust

    Warming up with the new exhaust :)
  12. R

    Special custom built exhaust

    No but I used to work in construction 30 years ago :)
  13. R

    Special custom built exhaust

    I would say barely but its a big improvement vs how it was before.
  14. R

    Special custom built exhaust

    Tried it today and the drone from 2100 rpm to 3000 rpm is nearly noticeable, il try to post a video later. But its a keeper way better then he standard X-pipe, finished product below. V-Band connects to mufflers and headers east to put in and take out. t.
  15. R

    4r70w is going out TKO500 is going in :-)

    The FE motors like 390 Has a shorter 10 splines. But that is the only difference.
  16. R

    Special custom built exhaust

    Okay Il post when its done
  17. R

    Special custom built exhaust

    For next season Im rebuilding my exhaust. From X-pipe to homemade version of the Borla crossfire. Its not exactly a copy but a similar idea. I wonder how it will sound :-)
  18. R

    4r70w current day swap info

    I used a BM shifter, but bassicly you can fabricate it to fit any shifter of choise. If you can or somebody could fabricate a crossmember, way cheaer then buying and trying to find one.
  19. R

    4r70w is going out TKO500 is going in :-)

    I just refabed it to fit the TKO500 , its a a homemade crossmember :)
Top