Search results

7173Mustangs.com

Help Support 7173Mustangs.com:

  1. R

    4r70w is going out TKO500 is going in :-)

    Very nice! Could you tell me how many splines do you have on the entry shaft?
  2. R

    Clutch disc replacement

    OK Thanks . It's a good information for me.
  3. R

    Clutch disc replacement

    Hi guys, My clutch disc is home made to fit a manual gearbox ZF S5-18/3 ( 22 splines) with 351C 1970. I think the disc is for 302 engine ( diameter is 10"). So i cannot just buy a new disc , the disc need a relining( hope this is the right word). For that, i need to know the thickness of a...
  4. R

    Cylinder head torque specifications

    Ok so ARP specs! thank you !
  5. R

    Cylinder head torque specifications

    Hi guys! Just one question before doing a mistake... Engine is 351C 1970 ( stock). i have new ARP bolts for cylinder head. Do i use Ford torque specifications or ARP specifications for reassembly? May be a newbie question but i have a huge doubt.... Thanks for your answer. Régis
  6. R

    Rear wheel bearing removal

    Thank you all for the answers!  So it's not easy ... i'll take it to a machinist...
  7. R

    Rear wheel bearing removal

    Hi guys, I try to remove the rear wheel bearing from the axle shaft...whithout success( even if i heat the bearing). I don't have the specific tool described in the shop manuals...Any ideas? Thanks!
  8. R

    rear suspensions Mach 1 1973

    Thank you Steve for your answer. So this is to improve stability Under hard acceleration. Nice!
  9. R

    rear suspensions Mach 1 1973

    Hi guys, Here is a picture of the rear suspensions. the rear left suspension is mounted behind the rear axle and the rear right suspension is mounted before the rear axle. I know this is correct for other car but never see that on mustang 1973...Is it to improve suspension for racing?? Thank you
  10. R

    Inside 351C 1970

    Nice !! thank you ! I'm glad this is normal!
  11. R

    Inside 351C 1970

    Hello guys! My engine is a 351C code D0AEL date 0J8 ( 2 main bolts). Can someone tell me what is the hole near the front end of the engine ? It's the first time i look inside the engine so ... Thank you all! [/URL]  
  12. R

    Getting the engine out of the car...

    When talking about the outer intake bolt, are you talking about that: And the accessory bolt holes is that for example: Sorry for these noob questions but i must not make a mistake. I don't imagine the cost to order an engine in the USA… Thank you again for your help!
  13. R

    Getting the engine out of the car...

    Can you tell me what  you call the 4 corners of the engine? Where are the 4 attach points? My load leveler is equiped with 4 lift chains so i'm interested to know? Thanks!
  14. R

    Getting the engine out of the car...

    Just because I'm curious, any idea of the weight of a 351C?
  15. R

    Getting the engine out of the car...

    Nice website you find. Unfortunately not translated in English or french. Very good products as RUSTYCO or OWATROL RUSTOL CIP. Primer Epoxy is not expensive too...
  16. R

    Getting the engine out of the car...

     Great job...May be one day for me :-/
  17. R

    Getting the engine out of the car...

    WOW, very impressive. Thank you for sharing this experience.
Top