Search results

7173Mustangs.com

Help Support 7173Mustangs.com:

  1. H

    Motorcraft 2100 Venturi Cluster wanted

    Hello. Does anyone have a venturi cluster for a Motorcraft 2100 they might want to sell? I just opened my poor performing remanufactured Motorcraft 2100 and saw that one of the brass emulsion tubes on the venturi cluster is split. I have read that this might be contributing to carburetor...
  2. H

    72 Grande - Urethane Dash Pad Installation Question

    Hi. I have a Ford tooling dash pad that rattles even though I have added cushioning. I think I am going to replace it with a urethane dash pad I also have but didn't use because I couldn't find suitable u clips for the 4 screws that attach the dash pad to the front of the dash. The standard u...
  3. H

    Mechanic recommendations Charlotte, NC

    Hello. I wonder if anyone can recommend a good mechanic in the Charlotte area that can help me trouble-shoot a rough idle on my 1972 302 while in gear. Car has been tuned, new plugs, wires, electronic ignition, etc. Could be a vacuum issue ...the only vacuum line in use is ported vacuum off...
  4. H

    Rough idle - need mechanic name or a mentor in Charlotte

    I have been fighting a rough idle on my 302 for some time and need to find someone locally to help. Any members in the Charlotte area that might be able to recommend a solid local mechanic? Mentors welcome too. Thank You! :)
  5. H

    Help with Center Bezel installation - 1972 Grande

    Hello. I have a 1972 Grande with a standard center bezel that I am replacing. Four screws attach the bezel to the dash. I have the top two screws that attach the bezel to the dash just under the dash pad but I don't have the right screws that attach the bezel at the bottom to the underside of...
  6. H

    Question about screws for bottom of center dash bezel

    Hello. I have a 1972 Grande with a standard center bezel set-up that I am replacing. Four screws attach it the bezel to the dash. I have the top two screws that attach the bezel to the dash just under the dash pad but I don't have the screws that attach at the bottom of the bezel to the...
  7. H

    Iso body side mouldings 72 Grande

    I need a set or just end caps. Does anyone have any or know where these might be available? Thanks.
Top