Search results

And here is one new….. https://www.npdlink.com/product/bar-assy-clutch-equalizer/206414?backurl=search%2Fproducts%3Fsearch_terms%3DZ-bar%26top_parent%3D200001%26year%3D1972&year=1972

I went with a malwoodusa pedal and a McLeod throw out bearing. that being said I do have a z bar somewhere that I am not using…..

I went with this one. https://www.summitracing.com/parts/GRI-CU-70087 with this hose https://a.co/d/cHx2FpC

I went with a griffin combo unit. Pretty much a bolt in, but they do recommend you support the bottom of the radiator from strap to strap My only issue was that I had to find a different lower hose that was 1.75 on both ends.

Left hand panel at the door has to come off. Three screws Then the bottom ring the connects to the dash around the steering column. Four screws The gauge cover is next. Five screws Then go up under the dash and drop the steering column. Four nuts You can now rotate the dash cover out to...

Possible to keep someone from moving the starter switch?

I got the opentracker stuff, but mine is not stock. Quality pieces. Can’t comment on ride as it just drove 50 ft so far.

Aeromotive has a tank with a stealth pump they sell. it has the pressure and return lines on it. they have a regulator that will work for efi and if you swap the diaphragm out will regulate down to carb pressures.

I used SEM products Primer Texture Satin black Came out pretty good considering they had tejano red and gold diamond tuck glued on covering them when I got them (90’s junk yard)

I made one from Masonite hardboard Gloss black paint (couldn’t find satin at the house) then scuffed with scotch bright

Hehe

Congrats on the milestone best wishes on wife’s upcoming surgery. heal up!

Ya Hard to get good web help.

Look into a continuing education shop class Free paint booth and shop air

Well in holleys defense it is the same chip shorta that all the manufacturers faced. the manufacturers are getting the parts before Holley

This is out there….. https://www.alkydigger.net/product/RBZ-351C.html

At least they could help you Term x ecu are months out

They are hidden. just go to hardware store and get #8-1/2” sheet metal screws there is a support behind where they screw in. So they have to be short enough to not hit the support or the dash will rattle.

I search here first. post on fb more as I can do it on my phone easier and seems to get a quicker response. rcadd1ct here Chris Robert on fb

Glad I could help. Good luck in your project