Search results

https://www.amazon.com/dp/B0BJPX9MV9?ref=ppx_pop_mob_ap_share

Amazon leather steering wheel cover

What's the open/close postion for vacuum vs. no vacuum?

Thanks. Still got a few things to do. I think my next task, beside paint removal, is to locate a suitable header that will work with my A/C, and locate a 2 barrel carb in the 300 to 350 cfm range.

Some updates: steering wheel, pwr steering pump, radiator hoses, new hood, more paint removed

I recently bought a new Lars pump and a used pulley. Took forever to bleed the system. So far so good.

I've got a pretty bad pully wobble. Just thought I'd replace both and be done with it.

I need to replace my power steering pump on my 72 vert 6 cylinder. Any suggestions on brand and source?

Sure, I'd like to see it.

On a somewhat related subject, can I remove my pwr steering belt and run temporarily while I repair my pump? Sorry for the hijack

Solenoid assembly for Carter RBS carburetor. Looking for one of these. Cheap. Real cheap.

Yet another welcome from Texas. Good forum, lots of friendly help.

Well crap. After cleaning my old switch, it now behaves like the newer. Pulling the gauge cluster tomorrow.

So, I tried my old switch (no dash lights) and the gremlins ran away. This leads me to believe that my 6 month old light switch has failed. I'm now rebuilding my old switch (which I probably should have done in the first place). Hopefully when I'm done the gremlins will still be gone and I'll...

Lights off, all gauges and turn signal lights normal. Lights on (even just parking), No speedometer of idiot cluster lights, turn signal indicators have faint glow, and red horsey hi beam indicator glows even though low beams are active. Switch to hi beams and goes to faint glow. Also, gas gauge...

I was asking in particular about the Sprints w/ honeycomb or camera panels. The scale model is showing a painted honeycomb.

Were any of the rear panels ever painted? https://www.hemmings.com/store/detail?product_id=2936&source=DC060722 https://assets.hemmings.com/uimage/[email protected]?rev=1

Yep, spring wire. I flushed out the radiator pretty good, still need to do the rest of the system.

I ordered one off of Amazon. Should be in tomorrow. I will never, ever use one of those non-molded hoses again.

Made a little progress cleaning up the engine bay