Search results

When the plunger is out, no vacuum, is the valve open or closed?

Ok. I need the Cliff note version for this thread. Is there or is there not a coupler currently available for tilt steering? Lares?

On the pressure hoses, is the 30" the shorter one for not doing the loop up on the brace? And that would be the 70" one?

I need to replace hoses on both of my verts. The Q code has the cooler, the L does not. I can't figure out where to order from. There's 4 different hoses in total, right?

Yeah, might be a long wait on that head. I'm currently trying to decide way to go with the exhaust system. I want to keep my ac, so I'd either need a modified header or maybe AussieSpeed dual outlet manifold.

I added the resistor when I put in the Pertronix I. The coil ohm's needed a little adjusting.

To this point, I've only used the Bauer metal conditioner tool from Harbor Freight, with the 40 grit drum. I'll need to use another means for some of the more recessed areas.

Were power drum brakes an option? My 72 vert L code has front/rear drums, would like to know if it's possible.

I've got a 72 vert 3sp toploader. 209 made (so I've read)

https://www.amazon.com/dp/B0BJPX9MV9?ref=ppx_pop_mob_ap_share

Amazon leather steering wheel cover

What's the open/close postion for vacuum vs. no vacuum?

Thanks. Still got a few things to do. I think my next task, beside paint removal, is to locate a suitable header that will work with my A/C, and locate a 2 barrel carb in the 300 to 350 cfm range.

Some updates: steering wheel, pwr steering pump, radiator hoses, new hood, more paint removed

I recently bought a new Lars pump and a used pulley. Took forever to bleed the system. So far so good.

I've got a pretty bad pully wobble. Just thought I'd replace both and be done with it.

I need to replace my power steering pump on my 72 vert 6 cylinder. Any suggestions on brand and source?

Sure, I'd like to see it.

On a somewhat related subject, can I remove my pwr steering belt and run temporarily while I repair my pump? Sorry for the hijack

Solenoid assembly for Carter RBS carburetor. Looking for one of these. Cheap. Real cheap.