Search results

What if you make some of your own with two standard washers of the same size and cut the u-shaped form with a dremel or similar grinder and a file?

Others have already mentioned some really helpful tips. I redid the paint markings on my driveshaft and rear axle based on the original found markings, others based from literature about drivetrain combinations and their exact markings or my buildsheet. I simply used some paint brushes of...

They are different. Simply search on a web search engine with billet hood hinges 1971 mustang and you will see that they are available too for our years 😉

Well done 👍🏻 It looks very nice and fits the car perfect!

Same here with my Moroso 351c 7 qts capacity oil pan (8 in.). It has the typical t-shaped front sump (3 in.) with the slosh baffle and a rear side scraper. I always thought that it is constructed for the OEM dip stick to match if you fill the advised capacity. But with 7 quarts (+ 1/2 in the...

Nice evening shot! Your car stands out! Tim

I went through this one year ago. Found out that all big and smaller suppliers that advertised them as available (and you could even buy them) didn't have them, they canceled my order often between 1-3 days. Hope you will have more luck. I ended up rebuilding my existing booster with a parts kit...

Welcome from Germany 🤗

Photos...

Switched 12V Power is the key. Both solutions would be fine. I did the relay thing, activated by a separate wire from the 20 amp fused ACC terminal on the fuse panel. From the relay I switch the Pertronix 1 and the electronic choke of my carb.

Kevin, I don't know about the SEM Hot Rod Black, it is not a product available in our country so I had to make something similar by myself. With the paint color of your choice, grabber lime, I would stay with the black Mach 1 hood treatment. It has just the looks. A naked grabber lime would...

Kevin, it is a simple 2 components single stage black paint color in semi/low gloss without clear coat. I did the body color first, then applied the black paint with a paint mask like original. It is a very smooth surface and will clean up fine when needed. It has just about the right low...

Kevin, I did it in a semi gloss black! Cheers, Tim

You crazy Mofo, Mike 😂 But what should I say? It looks also great 😊👍🏻

+1 Midlife That was the first thing that came into my mind reading this...

Welcome from Germany 🤗

Great cars and stories - welcome from Germany 🤗

Hi Joe, thank you for the great introduction and a warm welcome from Germany 🤗 Have fun! Tim

Thanks for the info, sounds like a good plan! The color combo you want to do is really nice! Keep us posted 😊

Very clean looking, great result! Where did you do the paint job and how? Looks like only very minor dust in paint...