Search results

Help Support 7173Mustangs.com:

  1. Manu Mach1

    Mach 1 in a Bank Commercial!

    Well done ;)
  2. Manu Mach1

    351 engine tear down

    Plastigauge joke, I mean I am the joke, I did it with the wrong wire (I guess) using 0.007"-0.020" instead of the 0.0020"- 0.0060"... Btw, the torque for a 4 main bolts is at 105 Ft/lbs, but how many for the smaller ones , on the manual I can't find about the small bolts, and I don't think the...
  3. Manu Mach1

    351 engine tear down

    Oh yes, Peter Anderson, I saw videos on Youtube from him, I know what you mean, I am subscribed to his channel. My next step is to plastigage the crankshft. I will post the steps.
  4. Manu Mach1

    351 engine tear down

    As it's my first engine completely disassembled, well, I have to do it the other way around without doing anything stupid. So I'm going slowly, I've got some literature, I'm gleaning information right and left, and come what may. I will be a long reassembly, but I prefere that at the end the...
  5. Manu Mach1

    Grandé is gone, Mexican Sprint arrived...

    Actually the whole interior is disassembled but I must have photos of the interior with the rear seat unfolded. Otherwise there is the same small door to insert skis or something.
  6. Manu Mach1

    Grandé is gone, Mexican Sprint arrived...

    This trailer has a weight of about 8000 N. To load or unload a vehicle, there are ramps that slide under the trailer and are put in place when needed.
  7. Manu Mach1

    Grandé is gone, Mexican Sprint arrived...

    I'm going to try to continue this topic because I stopped along the way, like many things I do, and it's not cool for me, nor for you. Well, I rebuilt the gearbox with a kit, the rear axle bearings have been changed, they were making a terrible noise. I adjusted the carburetion and the ignition...
  8. Manu Mach1

    Hello from Florida

    Hey, it was a good plan to give the car to your friend ;) Well, again another nice story, welcome.
  9. Manu Mach1

    Teaser pic of a car local to me.

    I need to watch this movie, never heard about this 34 minutes one.
  10. Manu Mach1

    New from North Carolina, 1972 Mach 1 T-5

    What another nice story, welcome to this amazing site :)
  11. Manu Mach1

    Window Roller

    Perfect fit, that's what is needed, thanks guys :)
  12. Manu Mach1

    Window Roller

    Arrived yesterday from Canada :)
  13. Manu Mach1

    Window Roller

    As you said, excellent post, we understand why the square roll is more effective and better suited. I order two of them from Canada. I was able to get the driver's door from the body shop, and I saw that the roller was changed, by a square one.
  14. Manu Mach1

    Window Roller

    Manu, please, be serious... As I was talking to myself, I decided to be more serious, and I found that.
  15. Manu Mach1

    Fabrice's 429CJ 71 project

    Fabrice, when are you publishing your novel? Perfect work, as usual :)
  16. Manu Mach1

    Window Roller

    So, square VS round I found this in a DIY store, knowing that the ball joint has a diameter of 8.5 mm and that the inside height of the rail is 25 mm. If I'm licky it should be enough. About the square one FORD MOTOR OEM # D6AZ-5323240-A as Hemikiller mentioned as well.
  17. Manu Mach1

    Window Roller

    Thanks guys. Need to order those ones then.
  18. Manu Mach1

    Window Roller

    It holds and stay in place ? On the ball joint ?
  19. Manu Mach1

    Window Roller

    But I would like to keep the original setup...
  20. Manu Mach1

    Window Roller

    I guess since 2012 it has been changed. Looks like ont he 73 models the ball joint is riveted. I can't find the right piece anywhere, or maybe I'm blind... Does anyone know where to find it ? Thanks
Top