Search results

Help Support 7173Mustangs.com:

  1. Michael O’Harran

    Rear View camera

    I purchased, but hasn't been installed yet as restoration is still in progress Master Tailgaters OEM Rear View Mirror with 4.3” LCD Screen and Waterproof 170° Backup Camera Kit for $130. I chose a full hard wired system, rather than wireless signal driven, because when I've made that choice in...
  2. Michael O’Harran

    2V or 4V

    So I'm gonna totally botch my attempt at regurgitating something my mechanic told me about my motor build. I have a 351C, with aluminum Edelbrock performer intake manifold and heads. The heads are 2V. The piston compression is 10:1 and its bored .30 over. It has a 4 barrel Demon Carb. Went...
  3. Michael O’Harran

    Pics and diagrams

    Thank you very much
  4. Michael O’Harran

    Pics and diagrams

    Thanks. Very clear.
  5. Michael O’Harran

    Pics and diagrams

    Yes those are them. Thanks
  6. Michael O’Harran

    Pics and diagrams

    These are great pics. Thanks
  7. Michael O’Harran

    Pics and diagrams

    So if your vapor line is up the DS, are all three lines run up the DS (brake fuel vapor)? I though the Manuel showed Vapor on passenger but it was not a clear picture or maybe I miss read it
  8. Michael O’Harran

    Pics and diagrams

    This is very helpful. I think I can follow this to copy it. I see the two are tight together and I see the vapor line end and rubber pick up. Little unclear near tank still if anyone else has the break or fuel line or tank hook up and body mount points. Thanks
  9. Michael O’Harran

    Pics and diagrams

    I am working on the install of the fuel vapor lines, brake lines and fuel lines. I have the Manuel and the old lines to see two are together on one side and one alone on the others. The preformed lines are not quite painting a clear picture. Can you guys help out with pics or diagrams to help me...
  10. Michael O’Harran

    1972 Ford Mustang Brand New Master Cylinder for sale

    I have this new Master cylinder I did not use, purchased through CJ Pony Parts. It did not come with a Proportioning Valve. It originates from a company called Master Power Brakes. I am having an issue with the return because I do not have the original Master Power Brake Box. I ended up...
  11. Michael O’Harran

    Trunk drop offs both sides

    I ordered from CJ Pony and didn’t use them. They have surface rust so they will not return them. Looking to sell them for cost plus what ever the shipping is. Anyone need them?
  12. Michael O’Harran

    Engine Mounts Nightmare

    I tried to do my research on the intake and believe it will clear with the ram air system so hopefully there won't be any adjustments needed there for me. I hope yours remains fine for you. Thanks
  13. Michael O’Harran

    Engine Mounts Nightmare

    Fingers crossed on a successful rebuild
  14. Michael O’Harran

    Engine Mounts Nightmare

    New engine, new mounts, rebalanced drive shaft, new original bell housing, new suspension all around, rear end opened and resealed, all metal is solid and locked in as intended, full disassembly and reassemble. Man I sure hope we will have replaced the problem by now. There's only one moment...
  15. Michael O’Harran

    Engine Mounts Nightmare

    Its amazing the science that goes into the design and evolution of many small parts. Thanks
  16. Michael O’Harran

    Engine Mounts Nightmare

    Well I had 351M motor and some kind of mounts that were cut, welded sloppily, and hacked half off. Really scary stuff that that was the paid solution. I now have the proper 351C with the matching and proper mounts.
  17. Michael O’Harran

    Engine Mounts Nightmare

    So I have a mechanic doing the whole build, but I'm involved at most of the steps along the way and I am learning a lot, just lack the time and actual mechanical knowledge, but yes your right this came up to be an issue. So this 351M block was bought new and built with a tremec 5 speed trans...
Top