Search results

Help Support 7173Mustangs.com:

  1. D

    Cowl Panel Repair

    I got my car about 7 years ago, and ever since I had a problem with water leaking through the dash on the passenger side. It turned out my upper cowl panel was rotted out around the heater box inlet. This is apparently a very common problem on the older mustangs, so check yours out. I bought a...
  2. D

    I fixed my emergency brake today

    I've owned my car for almost half my life now, and the emergency brake has never seemed to hold. I even replaced the pedal years back and it still just popped out whenever I stomped it down. It's been parked in flat garages for years, but now it is an issue because I failed inspection lol. After...
  3. D

    2v Heads

    Anyone want 2v open chamber heads for the cost of shipping? A few valves are sunk, and they aren't worth much. If you live on Long Island NY come pick them up for free. I'm scrapping them in a week if there's no interest but it kind of kills me.
  4. D

    LS swap?

    Not even trolling, has anyone done an LS swap? I know it's sacrilegious, but it's a good, plentiful and compact mostly aluminum engine.  I'm weighing my engine options before I start spending money, and I don't want to go the modular route because I don't want to hack up the shock towers and...
  5. D

    Cowl Panel Repair

    I got my car about 7 years ago, and ever since I had a problem with water leaking through the dash on the passenger side. It turned out my upper cowl panel was rotted out around the heater box inlet. This is apparently a very common problem on the older mustangs, so check yours out. I bought a...
  6. D

    Replacing a rusty cowl panel

    Hey, I recently replaced a section of my cowl panel and it seems like alot of guys need to do the same. Here is what I did: look familiar? The fenders and windshield need to come out There are about 100,000,000 spot welds that need to be drilled. I bought some spot weld cutters, but they...
  7. D

    What are you listening to?!

    I understand a few of us are into music, what is everyone into lately? I've been listening to Meshuggah (songs to check out: Bleed, Stengah, Straws Pulled at Random), Frank Zappa (Black Page #2, Peaches en Regalia, Montana) and Tool (Ticks and Leeches, Rosetta Stoned, Triad) . Keyboard cat is...
  8. D

    Need tips from welding experts

    Hey guys, I am going to be welding a competition engineering sump onto a new stock style gas tank with a lincoln 140 mig welder. Are there any tricks to doing it or is it just like welding regular sheet metal?
  9. D

    Megasquirt 2 v3 on 351c

    TABLE OF CONTENTS: Pg 1-3 planning, mild setup and talk. Pg 4 Pictures, POST 34 http://www.7173mustangs.com/thread-megasquirt-2-v3-on-351c?pid=26741#pid26741 Contains detailed setup and tuning info. I've spent my summer researching and saving/ spending money on this project. I have a 73 mach...
  10. D

    73 mach 1 from NY

    Hey guys! I have a 73 mach 1 with a 3.73 trac lok 9", toploader trans, 351c 2v with an MSD 6a and billet distrbutor. I've had the car for 7 years and plan on keeping it for a while. The suspension is a couple years old, it sits a little lower than a stock mach 1. I recently replaced the cowl...
Top