Search results

Allow me to preface this posting with an apology if it has been covered. I was unable to find an answer to my speaker issue. I have an unusual situation. The P.O. of the car has welded up the speaker holes in the doors. (photo #1) I have a set of Polk Audio, 5 x 7 x 2.75" speakers to install...

My 71 Mach 1 is equipped with the standard interior. I am in the process of collecting parts to assemble a new dash to replace the existing dash, and hopefully look better,. With the standard interior, were there any chrome trim accents on the dash, glove box, instrument cluster, gauge pack...

My 71 has not had any form of a radio in it as long as I have had the car. I would like to install a ford 8 track player. It would be retrofitted before the install.  Could someone provide the dimensions of the black face piece on the front of the 8 track player, from top to bottom, left to...

My car does not have speakers in the doors. I am considering adding them. I was looking for options for a sleeve/boot for the wires to travel through and into the door. I see that a company,  lmr.com offers a set for 79-83 Mustangs.  Has anyone used these with success?  Or, is there an...

I have a few items that I am interested in selling or trading. Please let me know if I have misidentified anything. Willing to sell, trade, trade plus cash. 1. Air filter and heat riser.  Sand blasted, painted blue.  $100 SOLD 2. 351C 2V exhaust manifolds. $100 SOLD 3. C6 kickdown rod. $40...

I am interested in a lower dash assembly. Something that hasn't been drilled or cut, and isn't rusty. Ideally one with all the plastic clips and routing pieces for the wiring. I've seen a couple on CL for $50-$60 , but the sellers don't want to ship. 

I'm looking for three items.  A ford 8 track player, the correct 8 track bezel, and a reverse lock out rod for a toploader. Motor is a 351C if that makes a difference   Thanks

In the past I have purchased wire by the foot from a company named 4RCustoms. They have a large selection of colors and markings. I am curious, are there are any other companies that offer wire by the foot, that have a good selection of colors and markings.  I need to re-wire my headlights and...

The drivers side window of my 71 has excessive movement form side to side.  The window rolls up and down smoothly. With the window up, the door closes fine. No leaks. I'm guessing my adjustment is o.k? There is no up and down, or back and forth play in the window. Only side to side. Unable to...

Is anyone reproducing the black mini console for our cars? 

The doors on my 71' Mach 1 will not stay open. A friend who works in a body shop came over and looked at the hinges. He stated that the pins are fine, but that the tensioners that holds the doors open is the issue. I want to replace both lower hinges. I don't want to use an after market part...

Sent my gauge to be recalibrated. Didn't hang onto my receipt. Package was lost. Shame on me.  Does anyone have an oem alternator gauge for sale?

1971 Mach 1 Speedometer  appears to be reading about 15 mph less than the speed I feel I am going. Below is the set up I have. Anyone have any ideas? toploader rebuilt by David Kee.  7 tooth gear inside transmission 16 tooth gear on cable. 3.00 rear end. I rotated tire one revolution and the...

1971 Mach 1.  All new front suspension, rebuilt close ratio steering box, rebuilt tilt column, new rag joint for tilt column.  Steering box has been centered and front end alignment performed   My steering wheel and rag joint move in unison. When I turn the rag joint by hand, I have 3/4” to 1”...

I'm aware that the lighting of the instruments leaves something to be desired. However, I think I must be doing something wrong. I installed a set of led lights on the gauge/speedo cluster. I wasn't impressed with what ever improvement there may have been. I plan on looking into grounding and...

I have a 1971 Mach 1, non ram air hood, 351 C, edelbrock performer rpm, MSD distributor, Holley avenger carb. I need an air filter assembly that will clear the hood and the distributor. Any recommendations? 

I purchased a mini console/consolette with opening for clock.  I have converted the car from a C6 to a toploader.  I have purchased the rubber boot, and the filler plate, as well as the mini console. Setting the console directly on the transmission tunnel, I have about a 3/4" gap between the...

I am interested in a black, two spoke, padded, steering wheel. Complete and in good condition.This is for a 71 Mach 1 ty

I  recently received a rebuilt Ford tilt column for my 71 Mach 1. Prior to installing the column and my steering wheel, I would like to verify if I am indeed missing a few parts. My steering wheel is a two spoke, horn button blow style. I believe I may be missing several parts. Looking at the...

While by passing the resistance wire on my tach, I decided to dig further behind the dash to look at the electrical.  I found several electrical connectors not attached to anything. I downloaded the colorized wiring diagrams and attempted to trace out the circuits. i believe I have identified a...