Search results

Anyone have any experience with the aftermarket sport mirrors? The base on my Passenger side is cracked and it does not hold any type of adjustment. My drivers mirror is all scratched up and the remote does not work at all (it is connected) and does not hold any adjustment either.

Ok. need some suggestions here. Engine is 408 Cleveland Stroker kit from Tim Meyer Cam is 229/239 @ .050", 114 LSA, 108 ICL, .614"/.623" lift. Full Roller (spec'd by Brent at Lykins) Air Gap Intake Trick Flow 225 CC Alum Heads Static Compression at 10.9 Dynamic is about 8.4 Carb is QF 750 DP...

I finally bit the bullet and ordered new rear shocks for the 73. I ordered the Aldon single adjustable. I will say these are a very nice set up. I have been working with different combinations of shock adjustment along with me caltracs. Basically trying to find my ideal set up for cruising...

I have the chance to score a set of Leather front seats from a 2015 GT premium in perfect condition. Car had 12,000 miles on it when it got rear ended. Price is hard to pass up. Under $400 for the set. Anyone try to adapt these to a 71-73?

I am finally getting around to swapping out the crappy KYB rear shocks. I pulled the old shock last night and noticed some metal fatigue on the passenger side upper shock mount. As far as I am aware this car has never had air shocks. See pic. Solutions? Suggestions. I was thinking about getting...

Help/Suggestions needed. 73 Mustang. Running 4 Piston Wilwood up front drums in the rear. Original disc brake car. After approx 500-750 miles on this set up the front right caliper hangs up after about 20-40 miles of driving. Park for a bit and it is fine until after another shortish drive. This...

Looking for a Radiator Hold Down Bracket for the right side? (The Shorter one).

OK. I am not good at reading and understanding wire diagrams. The pic below is of the wiring instructions. I need help identifying which wire in the car is the power supply to fuse box from under the hood. Thanks in advance.

Looking for recommendation for plugs (heat range) and gap for this set up. 408 C Stroker Bore 4.03 Stroke 4.00 static compression 10.9:1 Trickflow Aluminum 225 CC Heads Custom DUI ignition from Performance Distributors Edelbrock Air Gap Intake Headman headers Cam Specs 229/239 @...

Building a 408 Cleveland with the Stroker kit from Tim Meyer using the Molinar SVO crank. The timing set I have is Rollmaster CS3130, which is correct for this application, but there is an issue with the manufacturing. They Key ways are cut too small. Being a hardened gear filing is not really...

I know the prothane mounts work with the 71-72 perches. Will they work with headers?

I know this is not a typical engine amongst the forum but thought I would put a feeler out and see if anyone has something in their stash they want to get rid of. Looking for a 4bbl intake for FE 390. This is going on a 68 F100. Let me know if anyone has anything. Thanks in advance.

Picked up this 68 F100 Ranger. Clean truck, 390 with three on the tree. Haven't decided what I am going to do with it yet. Needs some interior work and tuning but it runs, drives, shifts, and stops good.

Ok. So this has been going on for a while now. Front right wheel bearing was shot. Replaces both sides. Worked great for a while (about 150 miles) Started to get some noise/vibration in front. Pulled the wheels to check bearings again. Left was perfect just as set. Right was loose. Castle nut...

Im pretty sure this is why my fan is either on or off. Looking for a new one. Any help appreciated. 

I have an opportunity to pick up a set of 4V closed chamber heads. DOAE-N heads both have date codes of Jan 1970. They are untouched, still sporting the ford valves. They were Magnafluxed by a local shop (well known) and no cracks found. What would be a good price on these?

Just wanted to say that I hope everyone is OK after last nights storms.

Thought I would put this up. Just ran across this auction on August 24th. Looks like a fair bit of Cleveland stuff as well as some pretty cool cars. http://www.toddcrillauctions.com/events/rick-and-julie-schafer-collector-car-parts-auction

Was a nice looking 73 coupe driving around Cedar Rapids today. Got a pic from the back. 

Looking for the torque specs for the front leaf spring eye bolt and the rear shackles.