Search results

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    C4 pan fill questions

    Hi All I removed my c6 to Have it reconditioned only to find a piece of the casing missing Which lines up with a locating dowel and bolt hole So decided to find a c4 that would give me more room for headers,one came up on eBay  A tci unit not used so I bought it I have now found out they do...
  2. B

    Ram air

    Ok thx will do I have found the search has changed it use to be very easy to ask a question And info came up very easy now the site has changed its not so easy :huh:  I love this site no other is as friendly and as keen to help
  3. B

    NEED ALL MEMBERS TO RESPOND PLEASE!

    72 H code sportsroof Mach 1
  4. B

    Ram air

    Hi,I have just bought plenum and snorkels for my 72,but require the actuator vacuume motors it seems you can buy them as a kit but hard to find them separate does any one know where I can get them pls I bought the snorkels second hand as live in England and they were to expensive to buy With...
  5. B

    Mega shifter vs std shifter

    Hi all Have had good feed back on this site and really helped with my 72 Mach 1 project Thx for your help So I have decided to keep the c6 and sort the leak out Now would like your opinions on it has a b&m megashifter I like the look of it in the car never used one so know ideal what...
  6. B

    C6 vs c4 fmx

    Looks original starts up good ticks over nice don't know what it's like under load as not on the road yet shows 98000 miles
  7. B

    C6 vs c4 fmx

    All sounds good advice and has put my mind at rest I will keep the c6 It has a b&m mega shift kit i like the look of it in the car who likes them here Or would you go back to original, I do not have original shifter so would need to purchase the parts
  8. B

    C6 vs c4 fmx

    Also any info on comp cam 238 is it suitable for street use with my engine as above
  9. B

    C6 vs c4 fmx

    Thx for comment I was concerned that as my 72 is H code 351c 2v could be low Hp I would be disappointed if gearbox dragged it back,I want it for street use going to my local meets tearing up the street a bit and just looking good I will up grade carb and inlet manifold to elderbroke And...
  10. B

    C6 vs c4 fmx

    Proberly the safest bet Do the new rebuild kits create less drag than the original,as been told c6 robs horse power And seems not many headers available I have 351c 2v
  11. B

    C6 vs c4 fmx

    Hi I have 72 Mach 1 351c with c6 that is leaking and will need a rebuild am I better keeping this or changing for c4 or Fmx engine I believe is stock at the moment I will look to change inlet manifold carb and headers plus exhaust to gain more horses Regards Perrie
  12. B

    Centre consul repair

    I have received consel in post and they did not pack it good so front r/h side that goes under dash is in about 7 pieces
  13. B

    B&M shifter

    Does a b and m mega sifter fit with a centre consul Is there a benefit to keep b mad m shifter or better to go standard I have the shifter all ready fitted with out the consul but want to fit the consul I have to take gearbox out has big leak I have seen there is no control to lock gearbox...
  14. B

    Centre consul repair

    It's in the post coming to me when I get it il post photo of crack which is a complete break but when pushed together looks fine Clock has numbers that scroll round not hands at this stage not known if works Regards Perrie
  15. B

    Centre consul repair

    Thx for the good info Regards Perrie
  16. B

    Centre consul repair

    Hi I have just purchased a long centre consul which is cracked through the side by the ashtray does any one know what the best glues are to enable me to repair it Has any one had to do it Any info would be great Regards Perrie
  17. B

    72 tilt colume ignition actuator

    Just a update I had parts arrive to repair tilt stearing and have fitted them And now reassembled Also fitted ignition brass gear and alloy part it pickup on And put all together ignition now works? But have play in colume ? It's not the bearing comes a little further down any ideas pls
  18. B

    72 tilt colume ignition actuator

    Thanks fo info on you tube I also found other video which helped as well so have now orderd parts from classic cougar Just waiting for parts to arrive so I can reassemble im looking forward to getting it back together
  19. B

    72 tilt colume ignition actuator

    Hi my 72 Mach 1 has a problem with the ignition when you turn it to start The engine it clicks and then will not return,some times I can turn it 180 degrees But then jams I have removed the ignition barrel and then removed the brass gear that had a broken tooth I have ordered a replacment its...
  20. B

    Fmx gearbox

    Hi I have a 351 2v mach1 that has a very leaky Fmx gearbox or torque converter I am going to remove it and have it reconditioned which will cost in the uk£1350.00 Is the Fmx gearbox good or should I upgrade to c4 They say they can tighten up the bands and add a kit to it that helps the gear...
Back
Top