Search results

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. N

    My 9 inch pinion seal was leaking. I marked the pinion and the nut and removed the seal

    How do I retighten it?  I think it has a crush sleeve.  It is a factory 73 rear end..
  2. N

    Do you guys think this would fit under a ram air hood?

    SB 351 CHI 3V 185 CLEVELAND ALUMINUM INTAKE MANIFOLD INT3V185H9.5W | eBay It looks like it can be cut down 1 inch
  3. N

    No right side brake lights!!! Turn signals hazards work

    So I went to go get a sticker but before I left I tested all my lights.  My right side brake lights are out but all the turn signals work. The hazards work as well.  I  then took off the driver side kick panel and tested all the lights by powering the white cable all the lights work.  It seems...
  4. N

    Car wont turn over unless u jump the solenoid It's a 67 cougar though

    I thought I would ask here b/c Midlife is here and he did wonders with my wives 73 stang wiring.  I'm not sure hwat is wrong but it won;t start with the key or turn off with the key!  It's like it is powering backwardsw thorugh the alternator!
  5. N

    Door panels Which are the best?

    My son just bought dash direct from Summit racing.  I told him he should of checked here first.  Any recomendations?
  6. N

    I need two mirrors rear view

    Does anyone have any???
  7. N

    DIm guage lights with LEDS!

    So even with the cool kid top of the line LED's and MIdlife wireharness updates with hardwired guages the lights are dulll.  I wonder if adding relays for the ehadlights would help?
  8. N

    Tilt column rebuild

    So I just replaced the pin in my wives tilt with the pin from West coast cougar.  I have a few pointers.  The pawl that the pin goes in should be removed and all the grease cleaned.  The pin as machined by west coast cougar did not fit.  I believe they say it was oversized.  I put in in my drill...
  9. N

    FiTECH and mallory and fuel choices

    I'm thinking of buying one.  I kinda think I should buy the 600HP version.  Leaves room for growth.  The car probably makes 250HP right now LOL.  Anyway, I have been reading about the fuel choices 1. Fitech command center (has a slew of problems that may or may not be fixed) 2. RobbMC surge...
  10. N

    Master cylinder port size Anyone know for a 73? They list two

    Advance has two listed and they are both order only.  The car is a 73 MAchi with disc drim power thanks chris
  11. N

    In cintral MA. I got a free Nasa hood it is rust free

    That said my body guy thought it was a little wavy for him so I bought a new one.  Someone with little more time than money can make a good hood here.  It is already primed with epoxy primer!!!!!!!!!!!!!
  12. N

    Factory A/C install in a non A/C car who has done it

    I have a chance to buy a complete setup for $800 underdash and underhood.  The factory box is mint as well no rust no damage
  13. N

    Tasca FORD and why I will never buy another ford product

    Check out this email train. This is with Tasca FORD. Why race if you cannot fix the f-in vehicles you sell!They eventually did not charge me. They said they don’t have time to fix. This is after I had it towed to them in RI. I live in MA. I will never uy another Ford. I will also say I called...
  14. N

    LED lights and flashers. Polarity matters!

    So I figured I would share with you guys my dilemna.  I purchased all LED lights for my wives car.  I also ordered the flashers with the ground that HIPO parts recommend.  The flashers did not work and neither did the directionals.  I did some research and found that in some case the polarity on...
  15. N

    glove box sticks. I think it should have a little handle

    It shuts fine but won't open.  WHat a pain. It seems to line up fine so I am not sure why this is happening
  16. N

    How do you guys mount a license plate to front of a 73

    Mine has no mount andywhere
  17. N

    Nuts dont fit the damn delux dash cover over the glove box!!

    I bought brand new fasteners.  They don't fit and the stud is an odd size.  So I had to find a die that was close and make threads.  Once I finished I realized the thread size was rare as hell.  It took M9 fine thread.  Only nuts I could find were ARP.  With shipping it was $24!  What a drag!  I...
  18. N

    instrument lens with the trip odometer

    Is there one available?  I could not find one and had to drewel out the push botton and cut the new lens for the install....
  19. N

    shoulder harness mount How are the belts held up?

    What is used to keep the shoulder eblts above the drivers head when not inuse?  My car has been apart for so long I have forgotten
  20. N

    I need a grill support bracket

    Anyone got one?  It is a triangular shaped piece that goes from grill to center support
Back
Top