Search results

Hi All, many of you Convertible owners may know of a 6-piece O-RING set that is available aftermarket. Two O-Rings are supposed to go in each hydraulic cylinder and two for the top pump. I have no leaks in my hydraulic system but am wondering if these O-Rings are needed or were originally used...

Hi All, replaced my speedometer gear (16 tooth) for the third time in just one week! Gear gets kind of carved out on one side ever so slightly until it won't be able to grab anymore. Could the driven gear be causing this? 302 with a C4. Thanks for any help!

Hi All, came across these Ford NOS headlight wiring harnesses. These have the plastic connectors for the grill lights instead of the metal connectors. Am I safe to assume that these are for 73’s only? They’ve never been installed but nevertheless both have about an inch of the insulation...

Hi All, found this trunk light for my 1971 Mustang few years back on epay , installed it and works like a charm. Light has engineering/part number D1ZB-13A756-AC engraved on its metal bracket but the socket is partially made from nylon?? Been on the hunt for an under hood light for a while and...

Hi everyone! Can a few people who own a Convertible please post some pictures with their TOP DOWN so the Header Weatherstrip can be seen? I just need to see how it is attached. Thanks in advance!

Can someone please tell me what color wires are for the Oil and Temperature idiot lights? Thanks All!

Asking all Convertible owners! I had a new top professionally installed in February 2023. When the top is up and resting on the windshield frame I have about 2" from the fabric (very front of the top) to the edge of the windshield trim, towards the windshield (if that makes sense). I need the...

Hello Everyone...it's been a while since I've posted on the forum! Question I have is, can the 20 A circuit breaker go bad? I mean my top was working fine before and after I bled the system (had to run it up and down at least 15 times to get all the air out) and to get a new top installed soon...

Hi All, Anybody have a picture of the underside of the chrome "Hockey Sticks" that go around the well of the top? Or I need to know what kind of foam gasket or sealer material there was originally. I remember vaguely that there was some kind of foam piece that sealed the stud to the body and...

Hello All! Does anybody know of an aftermarket Convertible top {EZ ON, Robbins, KEE etc.) that does come with a back glass that has the green factory tint? Thanks for any info!

Hi Guys, looking to buy a clip that holds the kick down rod on onto my C4 transmission, and YES the clip down by the transmission. I could probably use a regular "C" clip but trying this approach first! Thanks a bunch and Stay Safe!!

Hi everyone, can some please post a pic of the 1 upper fender bolt/bracket(s) location, with the door open of course. I can't remember the fender bracket going fore or aft the A pillar bracket. I figured it would fit/mount both ways, but need to know for sure. Thanks Y'All and STAY SAFE!!

Wanting to buy a working under hood light for my 71 Mustang for a decent price!

Hi All, I am wanting to install aftermarket Rocker Panel Moldings, made by Corvex, which I have been laying around for years. My 71 Convertible didn't have them from the factory, so no holes. I am wondering about the clip spacing so I know where I need to drill the holes! Does anybody have them...

Hi Guys, I am wondering what kind of ribbon sealer you Convertible owners have used to install your windshield? After the windshield is laid onto the ribbon sealer, is there any benefit or need of using bedding & glazing compound to fill the windshield gap to the frame? What thickness is the...

Hey Fellas, a rivet popped out on my Convertible Top when I ran it up and down a few times to purge air out of the system. What's the best solution to fix that? (Bracket is held in place by 2 rivets). 

Hi Folks, After putting on 500 miles on my rebuilt engine I decided to change the break in oil. I replaced the Royal Purple oil with Brad Penn "The Green Oil" 10 W 40 (Engine Builder's recommendation). I have a magnet built in in the oil pan drain bolt and I found some shavings on it! Should I...

Hi Guys and Girls,  I've owned my 71 Convertible for 32 years and during that time replaced the headlight switch at least 4 times! The recent switch I installed is less than 2 years old and during a night time drive my headlights started to go off and on. Keep buying these switches can't be the...

Hi Y'ALL, since I didn't center my power steering box :shootself: upon install I would like to do that now. I recently removed my headers so they can be ceramic coated (had them at a shop before to get this done and they POWDER coated them and telling me they ceramic coated them) . So anyway...

Soo, went back to the alignment shop this morning. I gave them a different set of camber bolts since mine are shot, so they say. They installed them and aligned everything, so they say, and the car drives like crap and there's a noise now on the right front. No noise before. Camber   ...