Search results

I have a 71 mach1 with a 351 4v, c6 and 9 inch rear. I am looking to replace the drivers side axle. Would the axle be a 28 spline or 31? Any suggestions on where to get one at a decent price would be appreciated. Thanks Rick

My right directional signal light inside the car does not always work. The signals outside work fine. I figure its a loose bulb , they were changed to led about 5 years ago. I am trying to get the bezel off and get to the bulb. It is fighting me and the problem is it is hitting the steering...

My wife's 65 convertible is pictured in the readers album section. They have me listed as having a 71 convertible but I actually have a Mach 1. Glad to be in it. I had sent the picture in at least 6 months ago and forgot about it so it was a surprise.

I have a 71 351 4V with a holley carb. The car has been running great for some time now. I went for a ride yesterday for about 1/2 hour. I stopped the car for about 5 minutes. The car was a little hard to start after the rest but would not idle. It kept stalling. I was able to make it home and...

Does anyone have a couple of these clips. They are for holding the bezel in place on the switch. I checked around and can't seem to find them. The only clips I see are for holding the switch in place, not the bezel.

I'm replacing the deluxe door panels. I transferred all the things over to the new panel and made all the cutouts. Kind of a pain with the electric windows. My questions is how to put the clips in the back of the new panel so they line up with the holes in the door. If anyone has done this with...

About a month ago I was stuck in traffic on a hot day for about 2 hours. Towards the end of the 2 hours the power steering started acting up. It felt like the pump was not working and it was hard to turn the wheel. Once I got on the highway and things cooled down everything was back to normal...

I have a 1" tear in the vinyl on the armrest of a 71 Mach 1 with deluxe interior. I also have power windows. I can't seem to find a door panel to replace it with. Has anybody done vinyl repair and will the repair be visible and hold up? Can anybody tell me where to get a replacement door panel...

I have a 65 vert. with standard interior. I was going to have the front seats reupholstered. I went to two different shops to see how much they wanted. One shop wanted $700.00 for the pair and the other shop said around $600.00 for the pair. That was with me supplying the material and the foam...

I have a 65 with a 289. The power steering pump stopped working. I had a stock setup. I bought a saginaw pump with the pulley and bracket. The high pressure hose does not fit on the new pump. I called Borgeson and they told me to get a 8 AN to 5/8 inverted flare adapter and a pressure reducing...

I bought a 65 convertible in Oct. and have been fixing it up all winter. When I put the instrument console back it was causing a short making the circuit breaker in the flasher go off. When I hook the black-green wire to the constant voltage regulator it causes the whole metal part of the back...

Is the removal of the compressor clutch a straightforward job or is there something i am missing? I want to take it off just to shine it up,so if it is a big deal I can do without it. Any tips are appreciated. I was thinking of media blasting it.

I have a 351c 4V with a C6. Would a shift kit give me crisper shifts? I don't race but would like the tranny to maybe wind out a little more than usual. Anyone have any experience with this? Thanks

I have a Holley Street Avenger Carb. The choke works fine when the car is cold. It comes on and goes off as it should. The problem is if I shut off the car when the engine is warmed up and then start it up a few minutes later the choke is back on, with fast idle. It won't let me kick it down for...

It was certainly more than I wanted to pay for a belt lens but it is just about the last missing piece...

Mike from Motorcity Mustang did me a big favor and I owe him one.I have a repro dash pad that is only one year old and in almost perfect shape. Mike asked that I donate it to a site member that could use it. So if you need it please let me know. First one gets it. It is black. I will only ship...

Does anyone have the small( 4-5") piece of tubing and fittings that goes from the power steering pump to the high pressure hose? I believe this would have been on 71 and 72 mustangs built before 5/72 . I have already checked the usual suppliers. Thanks, Rick

My air conditioning has a slow leak. I was going to just tighten all the fittings. Is it better to take them apart and use something like pipe tape or dope on the threads? There is no hurry as it is 32 degrees here but its a good winter project. Thanks, Rick

The distributor vacuum advance went bad and I am going to replace it. I bought a new one and the instructions say you have to adjust it before installation. You need to know the dist. tag number in order to know how many turns to adjust it. Where would I find that number? It is a 71 351C 4V...

Can someone please tell me if the light in the glove compartment is supposed to be controlled by a plunger switch to the door of the glove compartment on a 71 mach 1?