Search results

How much for tail lights

I would also like to know where the rotor is supposed to point to I am used to it pointing at the number one cylinder on chevys I don't see it marked on the cap engine is out of the car newly rebuilt the balencer is at tdc plugs are out piston is on tdc both rocker arms are stationary on number...

Well I have the front aprons and radiator support welded on no just need to do the rear and apron extensions. I used dynacorn aprons and they don't have the holes for the clips for bolting the fenders on. So I will have to figure that out the I also need to patch the cowel . Here is what it...

How much to ship the rear bumper to 68022 elkhorn ne

Looking for a radiator support new are around 130 to 180 I am on a budget so used will do I also need the sheet metal that is welded to the cowel and the fender aprons they don't reproduce these I need both sides. Any help is greatly appreciated I would be willing to barter also I have a stock...

I believe the ones made after may of 71 are cobra jet open chamber but prior to may they are the closed chamber with a 4 and a raised dimple in the corner of the 71heads prior to 71 they just had a 4 in the corner

mine are rusted out and I need those also

where do I get this sheet metal that welds to the Cowl and rear fender apron and where do you get the bracket that the good hinge bolts to on the out side of the apron? also does any one remake the splash Shields I need the drivers side front that starches to the radiator support? also a dumb...

Thank you for the info I will let you know how it goes.

Is it possible to replace crankshaft and bearings on the engine stand with heads on?

Yes 6 to 12 inches of quarter panel

I need a set of used door jambs preferably no rust cut from the middle of rear window on forward. Let me know if its possible and how much with shipping to 68136 omaha

Is any one a member in the mach 1 club I forgot my username and am wondering if someone can look me up its miklein or mkleins29 or something of that nature please can someone look me up and reply it should be one of only a few members in Omaha nebraska

4v intake manifold 150.00 Harmonic balancer 20.00 2v heads 120.00 Timing chain cover 20.00 Exauhast manifolds 25.00 New Pro comp electronics ignition wires 10.2mm red 1 boot needs recrimped 30.00 Pics also flex plate new in box 40.00 block plate 20

No you should be able to change them out or bring back to the machine shop and ask wtf

Just put a air gap intake on and wanting to sell my cast iron one. Figured I would give you guys first dibs before posting on eBay. I am looking to get around 175 for it with the bolts and valley pan. I also have a set of 2v heads for 125 a flex plate new in box for 40 a block spacer for 20 all...

1972 cobra jet casting but its a two bolt main 2 v block and mains 250.00 2v heads 100.00 Crankshaft 125.00 Edlebrock 2 v intake 100.00 Holley 650 double pumper 100.00 Manifolds 30.00 Flywheel 50.00 Block plate 20.00 Rods and pistons 50.00 Sorry about the repost two books were wrong...

Well I got dupped by the casting number it is a 2 bolt main 2 v engine with cobra jet casting numbers I tore it all down last night price willl change don't understand how two books could be wrong

Holley 650 double pumper 100 could use a freshening up Edlebrock performer rpm intake 2v 125.00 Cobra jet four bolt main block from 72 good shape 350.00 Crankshaft 125.00 Rods and pistons 50.00 Harmonic balencer 30.00 Exhaust manifolds 50.00 Flywheel new in box 50.00 Block plate 25.00...