Search results

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. H

    Holley 12-305 OE Style EFI Fuel Tank Modules, 255 LPH

    Gentleman ...  Forgive me if this post is misplaced... i did a search but could find nothing on this subject.. The above Holly in tank OE (Replaces the OE fuel sending unit) EFI fuel pump kit is for a 1970 mustang ... Other than the fuel gauge needing to have the correct set up .... Can...
  2. H

    Dual voice speaker wiring

    I have only used dual voice speakers that were subs. Basically there are just two coils that can be powered at the same time. You can throw a bit more power at the speaker and get a bit more response and volume. It is not necessary to power both coils for the speaker to function.
  3. H

    Looking for Input on Potential Purchase

    After i got my car painted i put it in the garage ... sat for a few years while i did other work to it. The first day it saw hot sun light flaws began to pop out everywhere. My paint guy didnt want to do anything. I kept chewing on him and he offered to reshoot it for $1500. I didnt like that...
  4. H

    new tire and wheels

    Those look great man. Have you lowered your ride? Or is it Stock height ?
  5. H

    351 Cleveland build advice needed

    Mutha’ Thumpr™ - High performance street/ strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle. Hyd. Hyd. 2200 to 5900 http://www.compcams.com/Thumpr/doc/THUMPRlow.pdf This kit gave me 537hp at 6100rpm and 512lb max torque at 4800 rpm she made 453lb at 3200 rpm
  6. H

    5.0L swap

    Is the tranny an auto ? Should work ok. There's a guy that comes to the local car show with a 5.0 swap. Might need some mounts for the tranny ?
  7. H

    71 custom build

    how bout dis
  8. H

    custom tower braces

    Thanks Luke. For the most part... The placing of the holes are most important. Much of the shape can be changed. I Studied many other braces and hoped for a less typical look.
  9. H

    custom tower braces

    I thought about doing away with the shock mount bracket at the top... And incorporating it in to the export bracket... But I didn't want to modern look.
  10. H

    custom tower braces

    I used reg carbon steel. The steel is strong but the design gives it it's strength. I can give you the cad drawing if you wish. They do have free cad drawing viewers out there. Lux, Yes I did use a longer stainless bolt. I can't recall the length right off... But I'll check.
  11. H

    custom tower braces

    Here are the eyes and rods I used. These worked perfect for my car and look great. http://www.speedwaymotors.com/Pro-1-Chromoly-Heim-Joint-Rod-Ends-1-2-20-RH-Male,29307.html http://www.speedwaymotors.com/Pro-1-Chromoly-Heim-Joint-Rod-Ends-1-2-20-LH-Male,83.html...
  12. H

    Saginaw Power Steering Pump Help

    You should be able to get any pulley you want to work just may take a bit of hunting. I would check the psi and flow rating for that pump before going to far. I bought a high performance pump for my car and had to send it back to have the pressure and flow reduced. If you feel you steering is a...
  13. H

    custom tower braces

    Ill have dimension info and part numbers for anyone wanting to make these your selves.
  14. H

    custom tower braces

    Current progess...
  15. H

    Gravity feed spot blaster

    I used a cheap one that only had a house and gun. Didn't even have replaceable tips. I blasted my whole engine bay. Worked rather well but my draw hose was a tad short. I used corse blasting sand and it worked great. I would stay away from black beauty. It wouldn't cut like the sand. Also if you...
  16. H

    custom tower braces

    Howdy Gentlemen, Took me a bit to get these laser cut. The material is 3/8 steel plate. Here is a preview.
  17. H

    custom tower braces

    Hello folks. Just thought I would share something I've been working on for the past few days. Ill update this when all of the dimensions have been confirmed and checked. Any comments or questions are welcome. Thanks.
  18. H

    AFD & CHI 4V HEADS?

    Both of those heads will yield good numbers. The Stock v4 heads can offer some good power also. My Cleveland (stroked 393) makes 537hp on the dyno at 5900 rpm. Stock cast heads with valve job and retrofitted for roller valve train. I went this route because it was cheaper than buying new heads. :D
Back
Top