1971-1973 Mustang Parts For Sale

Help Support 7173Mustangs.com:

Bill Perkins

Well-known member
Joined
Jul 3, 2015
Messages
140
Reaction score
21
Location
Opelika, Alabama
My Car
1972 Mustang Coupe 302 - 2V, one owner
I have a few 71-73 Mustang Parts for sale, look at the pictures and see if you need any of these parts for your project car
Items in pictures are as follows:
71-73 Mustang Center Console Glove Box w/Lid Arm Rest - OE - $65.00 plus shipping cost
71-73 Mustang Dash Instrument Panel Bezel - OE - $45.00 plus shipping cost
71-73 Mustang Console Ash Tray Door - OE - $45.00 plus shipping cost
71-72 Mustang RH & LH Park Light Lens - OE - $35.00 for the pair plus shipping cost
71-72 Mustang Standard Grille - OE, has a broken piece but is repairable - $75.00 plus shipping cost
71-73 Mustang Console Shifter Clock Bezel - OE - $60.00 plus shipping cost
71-73 Mustang Windshield Washer Bottle Reservoir, has a broken plastic mount but can be used - OE - $15.00 plus shipping cost
71-73 Mustang Front Bumper Tag Bracket - OE - $15.00 plus shipping cost
71-73 Mustang RH & LH Rear Marker Lamp Light Bezel - OE - $25.00 for the pair plus shipping cost
71-73 Mustang RH & LH Front Marker Lamp Light Bezel - OE - $25.00 for the pair plus shipping cost
71-73 Mustang RH & LH Grille Headlight Outer Trim Molding Bezel - OE - $40.00 for the pair plus shipping cost
71-72 Mustang RH & LH Front Grille Lamp Light - OE - $20.00 each plus shipping cost
71-73 Mustang Passenger Bucket Seat Back w/ Automatic Seat Back Release Solenoid & Wiring - OE - $100.00 plus shipping cost
71-73 Mustang (4) Rear Wheel Opening Moldings & (2) Front Wheel Opening Moldings, Driver quality, small scratches & a few small dings - OE - $75.00 Sell all (6) as a Lot plus shipping cost
71-73 Mustang Rear Seat Bottom Frame & Foam - OE - $50.00 plus shipping cost
71-73 Mustang RH & LH Rocker Panel Moldings - OE - Driver quality, small scratches & a few small dings, couple drilled holes, $50.00 for the pair plus shipping cost
71-73 Mustang Standard Shifter Bezel Ashtray - OE - $35.00 plus shipping cost
71-73 Mustang Brown two spoke steering wheel - OE - both will need to be restored, $50.00 each plus shipping cost
71-73 Mustang Standard Tail Light Panel - OE - both will need to be repainted, $50.00 each plus shipping cost
71-73 Mustang RH Roof Drip Rail Channels (2) Pieces, Mach 1, Sportroof - OE - a few small scratches, $75.00 both pieces plus shipping cost
71-72 Mustang Turn Signal Assembly Brackets that can be welded to the Front Valance Panel, (2) sets RH & LH - OE - $25.00 per set plus shipping cost
71-72 Mustang Complete Turn Signal Assembly, Refurbished, (2) Pieces RH & LH - OE - $70.00 both pieces plus shipping cost
73 Mustang Front Grille Assembly, aftermarket, Little Dusty but in great shape, $115.00 plus shipping cost
73 Mustang Front Grille Parking Light Housing RH - OE - $25.00 plus shipping cost
71-73 Mustang Complete Hood Latch Assembly - OE - $50.00 plus shipping cost
71-73 Mustang Hood Hinges - OE - (2) Sets, one set has the springs and one set doesn't have the springs, $40.00 for set with springs and $25.00 for set without the springs plus shiping cost
71-73 Mustang Automatic Floor Shifter Bezel has a one inch very small crack but is very usable - OEM - $15.00 plus shipping cost
NOTE: All Prices for Parts are at Best Offer, I need to clean out these parts from my garage!


Attachments​

  • IMG_6019.JPG
    IMG_6019.JPG
    3.7 MB · Views: 34
  • IMG_6020.JPG
    IMG_6020.JPG
    3.9 MB · Views: 32
  • IMG_6021.JPG
    IMG_6021.JPG
    3.7 MB · Views: 27
  • IMG_6022.JPG
    IMG_6022.JPG
    3.6 MB · Views: 26
  • IMG_6023.JPG
    IMG_6023.JPG
    3.5 MB · Views: 25
  • IMG_6024.JPG
    IMG_6024.JPG
    3.4 MB · Views: 24
  • IMG_6025.JPG
    IMG_6025.JPG
    3.5 MB · Views: 24
  • IMG_6026.JPG
    IMG_6026.JPG
    3.6 MB · Views: 25
  • IMG_6027.JPG
    IMG_6027.JPG
    3.5 MB · Views: 26
  • IMG_6028.JPG
    IMG_6028.JPG
    3 MB · Views: 25
  • IMG_6029.JPG
    IMG_6029.JPG
    3 MB · Views: 26
  • IMG_6030.JPG
    IMG_6030.JPG
    3 MB · Views: 25
  • IMG_6031.JPG
    IMG_6031.JPG
    3 MB · Views: 27
  • IMG_6032.JPG
    IMG_6032.JPG
    3.1 MB · Views: 25
  • IMG_6033.JPG
    IMG_6033.JPG
    3.1 MB · Views: 24
  • IMG_6034.JPG
    IMG_6034.JPG
    3.1 MB · Views: 22
  • IMG_6035.JPG
    IMG_6035.JPG
    3.2 MB · Views: 28
 
Last edited:

Dark Horse

Well-known member
Joined
Nov 16, 2019
Messages
63
Reaction score
9
Location
Tampa, FL
My Car
1972 Mustang 351 CJ w/ auto Q code convertible.
1971 Chevelle SS 454 4 speed
Interested in wheel opening trim.
What would shipping be to 34668? (Port Richey, FL)
 

Bill Perkins

Well-known member
Joined
Jul 3, 2015
Messages
140
Reaction score
21
Location
Opelika, Alabama
My Car
1972 Mustang Coupe 302 - 2V, one owner
Bill,

Interested in wheel openings moldings. Could you please provide close up pics of each.

Thanks!
Mac
Bill,

Interested in wheel openings moldings. Could you please provide close up pics of each.

Thanks!
Mac
I hope these pictures help? I want to sell all six pieces at 1 Lot. These wheel opening moldings are daily driver quality not show car quality.

71-73 Mustang (4) Rear Wheel Opening Moldings & (2) Front Wheel Opening Moldings, Driver quality, small scratches & a few small dings - OE - $75.00 Sell all (6) as a Lot plus shipping cost
 

Attachments

  • IMG_6239.JPG
    IMG_6239.JPG
    3.6 MB · Views: 6
  • IMG_6240.JPG
    IMG_6240.JPG
    3.4 MB · Views: 3
  • IMG_6241.JPG
    IMG_6241.JPG
    3.5 MB · Views: 3
  • IMG_6242.JPG
    IMG_6242.JPG
    3.6 MB · Views: 3
  • IMG_6243.JPG
    IMG_6243.JPG
    3.6 MB · Views: 2
  • IMG_6244.JPG
    IMG_6244.JPG
    3.8 MB · Views: 2
  • IMG_6245.JPG
    IMG_6245.JPG
    3.6 MB · Views: 2
  • IMG_6246.JPG
    IMG_6246.JPG
    3.4 MB · Views: 3
  • IMG_6247.JPG
    IMG_6247.JPG
    3.2 MB · Views: 1
  • IMG_6248.JPG
    IMG_6248.JPG
    3.6 MB · Views: 4

Bill Perkins

Well-known member
Joined
Jul 3, 2015
Messages
140
Reaction score
21
Location
Opelika, Alabama
My Car
1972 Mustang Coupe 302 - 2V, one owner
Bill, I am committing to these. PM me to set up the sale.
I went to UPS and was quoted around $100.00 handling & shipping cost, I was going to ask $125.00 for both parts but priced them at $75.00 for both plus handling & shipping cost
Thank you sir
 

Bill Perkins

Well-known member
Joined
Jul 3, 2015
Messages
140
Reaction score
21
Location
Opelika, Alabama
My Car
1972 Mustang Coupe 302 - 2V, one owner
I hope these pictures help? I want to sell all six pieces at 1 Lot. These wheel opening moldings are daily driver quality not show car quality.

71-73 Mustang (4) Rear Wheel Opening Moldings & (2) Front Wheel Opening Moldings, Driver quality, small scratches & a few small dings - OE - $75.00 Sell all (6) as a Lot plus shipping cost
Just let me know what you think of the wheel opening moldings. I have someone else that has shown an interest in them but you ask first. Thank you sir
 

Bill Perkins

Well-known member
Joined
Jul 3, 2015
Messages
140
Reaction score
21
Location
Opelika, Alabama
My Car
1972 Mustang Coupe 302 - 2V, one owner
Interested in wheel opening trim.
What would shipping be to 34668? (Port Richey, FL)
I hope these picture's help? I want to sell all six pieces as 1 Lot. These wheel opening moldings are daily driver quality not show car quality.

71-73 Mustang (4) Rear Wheel Opening Moldings & (2) Front Wheel Opening Moldings, Driver quality, small scratches & a few small dings - OE - $75.00 Sell all (6) as a Lot plus shipping cost

I will check on handling and shipping cost with UPS and let you know


Attachments​

  • IMG_6239.JPG
    IMG_6239.JPG
    3.6 MB · Views: 1
  • IMG_6240.JPG
    IMG_6240.JPG
    3.4 MB · Views: 1
  • IMG_6241.JPG
    IMG_6241.JPG
    3.5 MB · Views: 1
  • IMG_6242.JPG
    IMG_6242.JPG
    3.6 MB · Views: 1
  • IMG_6243.JPG
    IMG_6243.JPG
    3.6 MB · Views: 1
  • IMG_6244.JPG
    IMG_6244.JPG
    3.8 MB · Views: 1
  • IMG_6245.JPG
    IMG_6245.JPG
    3.6 MB · Views: 1
  • IMG_6246.JPG
    IMG_6246.JPG
    3.4 MB · Views: 1
  • IMG_6247.JPG
    IMG_6247.JPG
    3.2 MB · Views: 1
  • IMG_6248.JPG
    IMG_6248.JPG
    3.6 MB · Views: 1
 

Bill Perkins

Well-known member
Joined
Jul 3, 2015
Messages
140
Reaction score
21
Location
Opelika, Alabama
My Car
1972 Mustang Coupe 302 - 2V, one owner
Mac, I think I made a mistake on the handling and shipping cost quoted by UPS for the Six (6) Wheel Openings Moldings.

What is your ship to Zip Code?

So sorry sir
Mac, I went back to the UPS store this afternoon to check on the handling and shipping cost for the wheel opening moldings and the cost was $45.00, much better than the $100.00 cost. If you are still interested just let me know please, again so very sorry for the mistake
 

Bill Perkins

Well-known member
Joined
Jul 3, 2015
Messages
140
Reaction score
21
Location
Opelika, Alabama
My Car
1972 Mustang Coupe 302 - 2V, one owner
I hope these picture's help? I want to sell all six pieces as 1 Lot. These wheel opening moldings are daily driver quality not show car quality.

71-73 Mustang (4) Rear Wheel Opening Moldings & (2) Front Wheel Opening Moldings, Driver quality, small scratches & a few small dings - OE - $75.00 Sell all (6) as a Lot plus shipping cost

I will check on handling and shipping cost with UPS and let you know


Attachments​

  • IMG_6239.JPG
    IMG_6239.JPG
    3.6 MB · Views: 1
  • IMG_6240.JPG
    IMG_6240.JPG
    3.4 MB · Views: 1
  • IMG_6241.JPG
    IMG_6241.JPG
    3.5 MB · Views: 1
  • IMG_6242.JPG
    IMG_6242.JPG
    3.6 MB · Views: 1
  • IMG_6243.JPG
    IMG_6243.JPG
    3.6 MB · Views: 1
  • IMG_6244.JPG
    IMG_6244.JPG
    3.8 MB · Views: 1
  • IMG_6245.JPG
    IMG_6245.JPG
    3.6 MB · Views: 1
  • IMG_6246.JPG
    IMG_6246.JPG
    3.4 MB · Views: 1
  • IMG_6247.JPG
    IMG_6247.JPG
    3.2 MB · Views: 1
  • IMG_6248.JPG
    IMG_6248.JPG
    3.6 MB · Views: 1
The UPS store quoted me around $35.00 for handling and shipping cost for the wheel opening moldings. Thank you sir
 

Bill Perkins

Well-known member
Joined
Jul 3, 2015
Messages
140
Reaction score
21
Location
Opelika, Alabama
My Car
1972 Mustang Coupe 302 - 2V, one owner
Interested in wheel opening trim.
What would shipping be to 34668? (Port Richey, FL)
I hope these picture's help? I want to sell all six pieces as 1 Lot. These wheel opening moldings are daily driver quality not show car quality.

71-73 Mustang (4) Rear Wheel Opening Moldings & (2) Front Wheel Opening Moldings, Driver quality, small scratches & a few small dings - OE - $75.00 Sell all (6) as a Lot plus shipping cost

I will check on handling and shipping cost with UPS and let you know


Attachments​

  • IMG_6239.JPG
    IMG_6239.JPG
    3.6 MB · Views: 1
  • IMG_6240.JPG
    IMG_6240.JPG
    3.4 MB · Views: 1
  • IMG_6241.JPG
    IMG_6241.JPG
    3.5 MB · Views: 1
  • IMG_6242.JPG
    IMG_6242.JPG
    3.6 MB · Views: 1
  • IMG_6243.JPG
    IMG_6243.JPG
    3.6 MB · Views: 1
  • IMG_6244.JPG
    IMG_6244.JPG
    3.8 MB · Views: 1
  • IMG_6245.JPG
    IMG_6245.JPG
    3.6 MB · Views: 1
  • IMG_6246.JPG
    IMG_6246.JPG
    3.4 MB · Views: 1
  • IMG_6247.JPG
    IMG_6247.JPG
    3.2 MB · Views: 1
  • IMG_6248.JPG
    IMG_6248.JPG
    3.6 MB · Views: 1
The UPS store quoted me around $35.00 for handling and shipping cost for the wheel opening moldings. Thank you sir
 

Bill Perkins

Well-known member
Joined
Jul 3, 2015
Messages
140
Reaction score
21
Location
Opelika, Alabama
My Car
1972 Mustang Coupe 302 - 2V, one owner
Bill,

A bit more on the shipping end than I expected. Go ahead and let the other guy take it.

Mac
Mac, I think I made a mistake on the handling and shipping cost quoted by UPS for the Six (6) Wheel Openings Moldings.

What is your ship to Zip Code?

So sorry sir
Mac, I went back to the UPS store this afternoon to check on the handling and shipping cost for the wheel opening moldings and the cost was $45.00, much better than the $100.00 cost. If you are still interested just let me know please, again so very sorry for the mistake
 
Top