bossbart
New member
1971 Mustang Mach 1 project car for sale: 1F02Mxxxxxx 351C 4V C6 Auto / Ram air. This car is completely apart. We have owned since mid 70’s. Car has never been in an accident. All original items, Seats, tinted glass, etc. come with the car: Original engine [apart]-correct numbers/trans/3.50 trac lock N case 31 spine axles/Ram Air parts/detailed new front suspension and steering parts/Two steering boxes/New Ford Rr leaf springs & 5/8” boss rear sway bar in car / 429 front coils / New 429 radiator / shroud depends on engine choice /Original Magnum 500’s w/ New 255 BFGoodriches/ + extra parts.
Items repaired earlier in life with Ford Parts:
Rr Qtrs Right and left.
Rr Outer Wheel well buckets Right and Left.
Taillight Panel.
Radiator support.
Frt Fenders.
Current repairs completed:
Right and left side fender aprons.
Rt & Lft Front frame rail patches.
Items needing repair:
Driver’s side torque box area – I have opened up to repair [Floor in that area}.
Possible Trunk floor – repair or replace.
Some repair needed in shock tower area. Do not need replacement, but some rust repair.
Extra Parts:
Extra DOAE-L Cleveland block – machined, some surface rust-mag’d -no cracks-screw in freeze plugs and crank.
Total of 5 doors. I with NOS skin added. All useable.
Extra deck lids.
Original + Extra hood.
1 extra Fender.
Counsel.
Original Mach1 stripe kit – excellent condition.
Good headers for 351C.
$12,000.00 for all listed above
The following extra parts are available: [not included with the car:]
NOS D1ZZ hood with twist lock holes added: $750.00
NOS D1ZZ Trunk floor: $750.00
NOS D1ZZ Mach1 grille: $750.00
The following engine is available [This was in the car]: [Not included with the car}
Complete 429 SCJ 4-bolt - Completely machined ready for assembly [Heads assembled]:.
Includes fuel pump/distributor/factory Must exhaust/ Lunati solid lifter cam[sCJ profile]/all Valve train parts.
460 Crank / Forged dished TRW Pistons-10.0 to 1 Boss 429 T rods balanced assy – Comes with engine.
$12,500.00
-------------------optional------------------------
((460 Crank/Forged Wiseco flat top Pistons-11.0 to 1 Scat 6.605 Rods – needs balancing: swap for above +$1000.00))
New Hooker 2 1/8” Headers for 71 Mustang – 1 tube over frame rail right side: $350 .
New Crites headers – no cutting of apron at bottom for 1 tube: $350.
Aluminum SCJ Intake [Hi Rise Blue Thunder]: $125.
Call Paul 734-673-9270 and leave a message.
Items repaired earlier in life with Ford Parts:
Rr Qtrs Right and left.
Rr Outer Wheel well buckets Right and Left.
Taillight Panel.
Radiator support.
Frt Fenders.
Current repairs completed:
Right and left side fender aprons.
Rt & Lft Front frame rail patches.
Items needing repair:
Driver’s side torque box area – I have opened up to repair [Floor in that area}.
Possible Trunk floor – repair or replace.
Some repair needed in shock tower area. Do not need replacement, but some rust repair.
Extra Parts:
Extra DOAE-L Cleveland block – machined, some surface rust-mag’d -no cracks-screw in freeze plugs and crank.
Total of 5 doors. I with NOS skin added. All useable.
Extra deck lids.
Original + Extra hood.
1 extra Fender.
Counsel.
Original Mach1 stripe kit – excellent condition.
Good headers for 351C.
$12,000.00 for all listed above
The following extra parts are available: [not included with the car:]
NOS D1ZZ hood with twist lock holes added: $750.00
NOS D1ZZ Trunk floor: $750.00
NOS D1ZZ Mach1 grille: $750.00
The following engine is available [This was in the car]: [Not included with the car}
Complete 429 SCJ 4-bolt - Completely machined ready for assembly [Heads assembled]:.
Includes fuel pump/distributor/factory Must exhaust/ Lunati solid lifter cam[sCJ profile]/all Valve train parts.
460 Crank / Forged dished TRW Pistons-10.0 to 1 Boss 429 T rods balanced assy – Comes with engine.
$12,500.00
-------------------optional------------------------
((460 Crank/Forged Wiseco flat top Pistons-11.0 to 1 Scat 6.605 Rods – needs balancing: swap for above +$1000.00))
New Hooker 2 1/8” Headers for 71 Mustang – 1 tube over frame rail right side: $350 .
New Crites headers – no cutting of apron at bottom for 1 tube: $350.
Aluminum SCJ Intake [Hi Rise Blue Thunder]: $125.
Call Paul 734-673-9270 and leave a message.