351C Crank Scrapers

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 14, 2020
Messages
158
Reaction score
189
Location
West Chester, Oh
My Car
1972 "Q" code Mach 1
When I was racing NHRA Stock Eliminator with my "88 5.0 Mustang I found this company who makes crank scrapers. You can get a single piece version or a Teflon equipped scraper. I used the Teflon model to get as much oil off the crank & rods as possible. It definitely benefited my engine in a couple ways. It unlocked some power. It also return more oil back into the pan sooner. I asked Kevin of Ishihara-Johnson Crank Scrapers if he made them for 351 Clevelands. I was surprised he hadn't. So I worked with him to develop the patterns using my 351C engine build which had the crank and rods installed.
The 351C Scrapers (1 metal & 2 piece Teflon) are now available. Check out his website at crank-scrapers.com. Take the time to read some of the tech stuff. It might open your eyes about oil control.
 

Attachments

  • 1636-03125.JPG
    1636-03125.JPG
    75.7 KB · Views: 1
  • IMG_20150816_130312139_HDR.jpg
    IMG_20150816_130312139_HDR.jpg
    3.2 MB · Views: 1
  • Cleveland_351_b.jpeg
    Cleveland_351_b.jpeg
    538.5 KB · Views: 1
  • 351 Cleveland Teflon a.jpeg
    351 Cleveland Teflon a.jpeg
    887.1 KB · Views: 0
  • Cleveland_351_c.jpg
    Cleveland_351_c.jpg
    1.3 MB · Views: 1
Back
Top