- Joined
- Jan 6, 2016
- Messages
- 91
- Reaction score
- 0
- Location
- Lynchburg, VA
- My Car
- 2001 Cobra convertible. 1971 Mach 1 351 C 4V 4 speed
Thanks Paul. Does it actually make contact with the crank? I would think that would be bad.That is an early Cobra Jet pan with the double baffle. Nice piece. Not all that valuable but a nice addition to a street car.
The scraper in the back part of the pan was never bent up enough from Ford so if you plan on using it take some measurements and bend it up a bit more.
Among other things it is good for a few HP by peeling off some of the oil that clings to the crank.
- Paul of MO
Correct, the crank should never touch the pan.Does it actually make contact with the crank? I would think that would be bad.
Touching is bad, close is good.That is an early Cobra Jet pan with the double baffle. Nice piece. Not all that valuable but a nice addition to a street car.
The scraper in the back part of the pan was never bent up enough from Ford so if you plan on using it take some measurements and bend it up a bit more.
Among other things it is good for a few HP by peeling off some of the oil that clings to the crank.
- Paul of MO
[/
Thanks Paul. Does it actually make contact with the crank? I would think that would be bad.
Paul of Mo
Enter your email address to join: