71 front disc spindles / calipers / hubs. Northern California

Bentworker

VIP Members
Joined
Jan 17, 2015
Messages
1,465
Reaction score
179
Location
California
My Car
71' Grande project.
IMG_20150208_100409.jpg

I have some parts pulled out of my 71'. The spindles are factory disc, passenger side is perfect, drivers side took some beating with a two pound hammer to separate from lower ball joint. Will touch up with a file. Hubs come with discs, (discs are garbage). Calipers are good cores or rebuild them yourself. All parts are covered in 40 something year old undercoating. The dust shields for both sides are nice shape. All the parts you need to go factory disk brakes. Everything is crusty and in need of cleaning.

Update... I tossed the disks and hubs in the scrap.

I don't having a clue what the pile of parts is worth (If anything). If it is worth something to you make me an offer. I get OK FedEx ground rates, this stuff is heavy! Other option is to pick it up. Can meet in Medford Oregon on the weekends or Redding CA weekdays after 7pm.

Pm me or reply to thread.

Peter

IMG_20150208_100327.jpg

 
Last edited by a moderator:

Bentworker

VIP Members
Joined
Jan 17, 2015
Messages
1,465
Reaction score
179
Location
California
My Car
71' Grande project.
Anybody want the parts? Trade me a decent bottle of something distilled?

 

Wyoming

Member
Joined
Sep 14, 2014
Messages
11
Reaction score
0
Location
Wyoming, uSQ
My Car
73 fastback's with 302. Cut out and welded in new rear quarters, rebuilt rear end and put in a T-5 transmission. Just finished putting Modern Driveline hydraulic clutch. New interior and body in primer. 5 years into build so far.
Will $20.00 do it?

 

Wyoming

Member
Joined
Sep 14, 2014
Messages
11
Reaction score
0
Location
Wyoming, uSQ
My Car
73 fastback's with 302. Cut out and welded in new rear quarters, rebuilt rear end and put in a T-5 transmission. Just finished putting Modern Driveline hydraulic clutch. New interior and body in primer. 5 years into build so far.

Bentworker

VIP Members
Joined
Jan 17, 2015
Messages
1,465
Reaction score
179
Location
California
My Car
71' Grande project.
Will $20.00 do it?
If I cover shipping...No.

If you cover shipping...Yes.
Any idea what it would be to 82007
Not really. I'm out at work and may not be able to get back to the shop for 10 days or so. I don't know if I can fit the spindles in a large USPS flat rate box, but if they fit I think everything could go in two of them. That would be about $28.00

 

Bentworker

VIP Members
Joined
Jan 17, 2015
Messages
1,465
Reaction score
179
Location
California
My Car
71' Grande project.
If I cover shipping...No.

If you cover shipping...Yes.
Any idea what it would be to 82007
Not really. I'm out at work and may not be able to get back to the shop for 10 days or so. I don't know if I can fit the spindles in a large USPS flat rate box, but if they fit I think everything could go in two of them. That would be about $28.00

Spindles and calipers are gone (in the scrap bin).

Thanks for looking,

Peter

 
Top