'71 OEM parts for sale

7173Mustangs.com

Help Support 7173Mustangs.com:

72460CJVert

Active member
Joined
Oct 31, 2016
Messages
26
Reaction score
0
Location
Corpus Christi
My Car
1972 Convertible Restomod
1971 Holman Moody built 460 CJ
C6 Trans
Do you still have the "exterior convertible trim - hockey stick parts have pitting, stainless rear piece is nice"?

 
Joined
Dec 24, 2013
Messages
880
Reaction score
158
Location
Minnesota
My Car
71 convertible
20170731_163009.jpg

20170731_163000.jpg

20170731_162945.jpg

20170731_162934.jpg

20170731_162939.jpg u

Do you still have the "exterior convertible trim - hockey stick parts have pitting, stainless rear piece is nice"?
I sure do - here are some photos.  The scuffing on the stainless from the boot cover will polish out, the pits will need to be drilled out, filled with silver solder and polished before going through the plating process.

 

street rod mach 1

Well-known member
Joined
Jul 28, 2015
Messages
88
Reaction score
0
Location
Minneapolis, MN
My Car
I own a 1973 Mustang Mach 1, currently in the restoration process.
how much for the window regulators and tracks for both the drivers side and passenger?

shipping to 55126 

 
Joined
Dec 24, 2013
Messages
880
Reaction score
158
Location
Minnesota
My Car
71 convertible
how much for the window regulators and tracks for both the drivers side and passenger?

shipping to 55126 
I am in Australia at the moment, returning on Sunday.  I can take some photos then.  I assume you are asking about the door tracks and regulators and not the rear quarters, correct?

You are not that far away - I'm down near Rochester - so if you are up for a roadtrip you could inspect them and have a look at the other stuff I have laying around that you might need.  Or I have to come up to the Cities sometime next week, I could just drop them off.

 

Carguy4sp

Well-known member
Joined
Feb 18, 2016
Messages
120
Reaction score
0
Location
Saw Florida
My Car
1972 Ford Mustang
Mike

I would be interested in the battery hold down if you still have it.

Rodney Robbins

 
Joined
Dec 24, 2013
Messages
880
Reaction score
158
Location
Minnesota
My Car
71 convertible
Would you happen to have a set of black rear deluxe seat belts?
Unfortunately I don't have any rear.  I do have fronts.  Belts are in good shape.  Some scuffing on the covers and tabs.  Webbing in very good condition, retaractors work great.  From the tags these are actually 1973 parts, but were taken from a '71 convertible, so somebody did an update on that car somewhere along the line.  More photos available.  $100 for the pair, plus shipping.

Sold

20170820_121750.jpg

20170820_121926.jpg

20170820_121936.jpg

20170820_122221.jpg

20170820_122228.jpg

20170820_122158.jpg

 
Last edited by a moderator:
Joined
Dec 24, 2013
Messages
880
Reaction score
158
Location
Minnesota
My Car
71 convertible
And how much for a pair front and rear side marker lights, if they're decent? ZIP 68106
I have two sets.  This is the nicer set.  Both sets have one of the rear marker wire loom clip tabs missing. Photos of that set in the next post...  A full set would fit in a medium sized  USPS fixed rate box.

20170820_122635.jpg

20170820_122627.jpg

20170820_122744.jpg

20170820_122751.jpg

 
Last edited by a moderator:
Joined
Dec 24, 2013
Messages
880
Reaction score
158
Location
Minnesota
My Car
71 convertible
how much for the window regulators and tracks for both the drivers side and passenger?

shipping to 55126 
I am in Australia at the moment, returning on Sunday.  I can take some photos then.  I assume you are asking about the door tracks and regulators and not the rear quarters, correct?

You are not that far away - I'm down near Rochester - so if you are up for a roadtrip you could inspect them and have a look at the other stuff I have laying around that you might need.  Or I have to come up to the Cities sometime next week, I could just drop them off.
Here are some photos.  These are a bit large and kinda heavy, so I would be happy to drop them off when I am in the 'Cities if you want them.  You could even choose the sets you want.  More photos are available if you want them.  I didn't post photos of all of the regulators - they are all in similar condition in terms of paint coverage and operation.  All 4 have somewhat ovalled guide rollers, so they really should be replaced on all of them.

20170820_124211.jpg

20170820_124215.jpg

20170820_124243.jpg

20170820_124247.jpg

20170820_124312.jpg

20170820_124317.jpg

20170820_124340.jpg

20170820_124343.jpg

20170820_124358.jpg

20170820_124407.jpg

20170820_124412.jpg

 
Top