7stang3
Well-known member
- Joined
- Jul 5, 2013
- Messages
- 45
- Reaction score
- 0
- Location
- Western Ne
- My Car
- 1973 Mustang base coupe, 302, ps.c4,a/c,p/b
Official start of the restoration today - pulled the seats and door sill plates. Found the build sheet but it was in a couple of pieces and if it was ever filled out the build is unreadable now.
[attachment=17321]
Driver's seat is bent. I had cut a small piece out of the vinyl to send to Cerrulo to see if they have a reasonably close match in cloth. The brown seems to be difficult as new cars have not used brown for a while. I have decided to get the original style vinyl from TMI and have ordered the SC seats.
[attachment=17323]
Having taken the back seats out, I found a little mouse sign. Not too bad for 29 years of storage however. I guess having a bull snake den under the shed helps rodent control .
[attachment=17322]
Hopefully, tomorrow will pull up the carpet and see if there is any damage underneath.
[attachment=17321]
Driver's seat is bent. I had cut a small piece out of the vinyl to send to Cerrulo to see if they have a reasonably close match in cloth. The brown seems to be difficult as new cars have not used brown for a while. I have decided to get the original style vinyl from TMI and have ordered the SC seats.
[attachment=17323]
Having taken the back seats out, I found a little mouse sign. Not too bad for 29 years of storage however. I guess having a bull snake den under the shed helps rodent control .
[attachment=17322]
Hopefully, tomorrow will pull up the carpet and see if there is any damage underneath.