'73 fender extensions (mounting)

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cazsper

Well-known member
Joined
May 30, 2012
Messages
1,066
Reaction score
2
Location
Sunnyvale, CA
My Car
1968 Coupe: 393w, TKO-600, Maier Racing springs, Global West suspension, Currie 9in with forged axles, 3.50 gears, Trutrac, Baer brakes front/rear
1973 Mach-1: 351c 4V, C-6, 3.73:1 gears and a long "To Do" list..
I was missing a fender extension on the passenger side. When I ordered a new set, this is how it arrived. It has three "tabs" that obviously go into the three holes located in the front of the fender. On the bottom of the piece, is a hole I figured a bolt would go through; only there's a no spot Forces  bolt to attach. Does this piece just attach  the three "tabs"? 



fb photo upload

 
I think that is where the bumper filler trim piece would attach to if you had a chrome bumper on the 7172s

 
Attaches by the 3 studs with self thread cutting stamped nuts
Ah.. ok. Thanks.. any idea where I might find them?

 
Back
Top