Alternate glove box light (heater control light)

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 8, 2019
Messages
748
Reaction score
270
Location
Missouri
My Car
1971 Mustang Convertible
1971 Mustang Mach I
1972 Mexican GT-351
1971 Mustang Convertible
1988 Bronco II
1970 Torino 4 door
I found an alternate way to install a map light. I have a pretty chopped up under dash harness that I bought to get the gauge connector from. It had the heater light bulb harness on it. It was a perfect fit in the glove box light. I have already tapped into the light green/yellow stripe used in the door switches. I think this is a live line all the time. I used the harness and the plug from the hacked up harness.  This may not be an option for everyone but perhaps it will work for someone. I have made a few other mods to the harness for tach power and tach signal. I hope it all works when I get power on it. I still need the switch. WCCC has them for $20 or I may just get a repop.

20210621_184035.jpg

 
Last edited by a moderator:
Back
Top