Alternator Bracket to Water Pump Bolts Question

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 9, 2020
Messages
493
Reaction score
671
Location
North Idaho & The Bahamas
My Car
1973 Mach 1
Some other Fords
351C engine; the two bolts that hold the alternator bracket to the engine attach to the front of the water pump.  My questions is: do these attachment bolts penetrate the 'wet' area of the water pump?  If I remove them do I have to worry about radiator fluid leaking out or when I re-install them do I need to worry about any particular thread sealant on the threads?  

Thanks.

 
Back in 2017, I posted a complete "how to replace a 351C water pump" set of instructions.  It contains an exact placement water pump bolts by size/length of bolts diagram along with many pictures.  This how to can be found by going into the following folders;

1) Tech Forum

2) Engine, Transmission, Drive Line, Etc

3) How to remove a 351C water pump

Good luck!

Mac

 
Back
Top