Battery Tray Apron Support WINNER

7173Mustangs.com

Help Support 7173Mustangs.com:

Joined
Aug 30, 2014
Messages
1,447
Reaction score
128
Location
Delaware
My Car
Stock 1973 Mustang Convertible with a 351C 2v and C6
Modified 1970 Mach 1 M-Code with a 351C 4v Manual

Just ordered one!! What did you use for an undercoating it looks really heavy, but I like it :]
I had it originally undercoating by a local shop.. afterwards I used 3m rubberized uncoating to spot spray areas. It matched the original very well.

 
Joined
Feb 17, 2019
Messages
89
Reaction score
65
Location
Australia
My Car
1973 351c 2v fmx convertible
Thanks for the info,

I have been looking for ages for this and thought I would have to make one. This saves a lot of time.

Great price and postaldan514 delivers to Australia. Ordered the part today.

cheers,

Mike

 
Joined
Mar 30, 2017
Messages
2,201
Reaction score
528
Location
The Netherlands
My Car
73 Grande 351C
71 Mach 1 429CJ
@Carolina_Mountain_Mustangs just send me one of these. Mine was rusty, and after a 3 days bath in acid I could have fold, cut and weld new metal in it, but this is so much more easy. They are indeed well made and their price makes the work to repair not worth it.

I haven't test fitted it yet, but bit worry about the holes or angles are not matching as the new apron I've ordered from NPD is really poorly made. I'll see this next weekend.

Small question, as mine was totally gone at the base and apron also badly corroded, do I need weld its base to rail over all its length and then do same from apron to support? From the tiny thin rests, looks like only 2 spot welds were next to the bolt hole and that the apron was welded only to the right side.

 
Top