Broken air pump outlet fitting

7173Mustangs.com

Help Support 7173Mustangs.com:

Joined
May 19, 2021
Messages
534
Reaction score
180
Location
Fort Mohave, AZ & So Cal
My Car
73 Grande will undergo three phase build process. Phase 1 is to make roadworthy. Phase 2 is interior/exterior restoration. Phase 3 is ++ performance.
Now I know the name is 71-73 Mustangs, but I have a part from my air pump, from an 87 TBird, and I had an accident and broke the 90 degree fitting in two.

10DC22F6-301D-4C50-B476-7E0DC13BAA44.jpeg

So, do you think I could use an adhesive and repair it? It can’t have much air pressure in that line. If you were trying to fix it, what adhesive would you use? It looks to be Aluminum, but could be some pot metal, I’m not sure.

 
Joined
Jan 1, 2012
Messages
8,233
Reaction score
969
Location
Springfield, OR
My Car
1971 Mustang Sportroof M code
Last edited by a moderator:
Joined
Jan 1, 2012
Messages
8,233
Reaction score
969
Location
Springfield, OR
My Car
1971 Mustang Sportroof M code
I have a Ford Motorsport air cleaner and the bolt hole spacing for the PCV connector on it is 1 7/8 (1.875) inches. The PCV connector looks exactly like the one from Edelbrock. The hose connection is slightly larger than 3/4", about 0.782"

 

midlife

Shorts checker
Joined
Jan 24, 2012
Messages
4,160
Reaction score
584
Location
Tucson, AZ
My Car
No Mustangs at the moment.
I too, ordered from Amazon: a chicken and an egg.  I'll let you know.

 
Top