EndOfAnEra
Active member
I have a bunch of stuff to sell off, I can ship any of these items however the larger items may get costly. Any one in Ontario or up state NY I can meet near Niagara Falls or Fort Erie Canada for pick up.
I am going to try to update with photos later today or tomorrow.
73 left and right front fenders OEM in excellent shape
71 72 urethane bumper with brackets. Rubber is good but needs restoration
73 urethane bumper with brackets. Needs full restoration. Small split in rubber.
2 - 73 front valances, one with holes for air dam and one without, both really good
71-73 rear valance without exhaust cut outs, really good
73 Mach 1 grille OEM, small piece of honey comb broken off near latch
Some left and right headlight boxes, blasted and painted. Not perfect.
A whole bunch of side marker bezels, all blasted and ready for finishing
71-72 front and rear extensions for fastback and coupe/conv
73 front and rear extensions fastback
Front strut bar crossmember, pretty solid. I have to remove from a donor so may take a little time. I will not go through the hassle of drilling out the spot welds so this will be removed by nipping off the frame rails leaving it for the buyer to properly drill it out.
Fastback roof. Again needs to be removed. Needs work around the windshield and above drivers door (approx 3" patch)
Also have a bunch of small items....brackets, trans mounts, pulleys, linkages etc....just ask.
I also have available a dash pan with VIN and title for a 71 Hardtop 1T01F (the dash pad shown in the picture will be removed as I need to keep the bracket below it).
Please PM me with any inquiries and I will do my best to get back with pics and info in a timely manner.
I am going to try to update with photos later today or tomorrow.
73 left and right front fenders OEM in excellent shape
71 72 urethane bumper with brackets. Rubber is good but needs restoration
73 urethane bumper with brackets. Needs full restoration. Small split in rubber.
2 - 73 front valances, one with holes for air dam and one without, both really good
71-73 rear valance without exhaust cut outs, really good
73 Mach 1 grille OEM, small piece of honey comb broken off near latch
Some left and right headlight boxes, blasted and painted. Not perfect.
A whole bunch of side marker bezels, all blasted and ready for finishing
71-72 front and rear extensions for fastback and coupe/conv
73 front and rear extensions fastback
Front strut bar crossmember, pretty solid. I have to remove from a donor so may take a little time. I will not go through the hassle of drilling out the spot welds so this will be removed by nipping off the frame rails leaving it for the buyer to properly drill it out.
Fastback roof. Again needs to be removed. Needs work around the windshield and above drivers door (approx 3" patch)
Also have a bunch of small items....brackets, trans mounts, pulleys, linkages etc....just ask.
I also have available a dash pan with VIN and title for a 71 Hardtop 1T01F (the dash pad shown in the picture will be removed as I need to keep the bracket below it).
Please PM me with any inquiries and I will do my best to get back with pics and info in a timely manner.
Last edited by a moderator:
