Big dog
Member
- Joined
- Jun 4, 2016
- Messages
- 21
- Reaction score
- 0
- Location
- Woolston southampton
- My Car
- 72 351 2v Mach 1 project just purchased
Hi All
I removed my c6 to Have it reconditioned only to find a piece of the casing missing
Which lines up with a locating dowel and bolt hole
So decided to find a c4 that would give me more room for headers,one came up on eBay
A tci unit not used so I bought it
I have now found out they do pan filled and case filled c4 I have bought the pan filled
It does not have a bell housing
I have a 72 Mach 1 351c 2v
Can you help me what parts do I need that will make this work I will also have to mod the drive shaft what yoke fits it
I would also like to get a higher stall toque converter about 300 rpm more
I am from GB so parts not easy to come by so info would really be great
Regards Perrie
I removed my c6 to Have it reconditioned only to find a piece of the casing missing
Which lines up with a locating dowel and bolt hole
So decided to find a c4 that would give me more room for headers,one came up on eBay
A tci unit not used so I bought it
I have now found out they do pan filled and case filled c4 I have bought the pan filled
It does not have a bell housing
I have a 72 Mach 1 351c 2v
Can you help me what parts do I need that will make this work I will also have to mod the drive shaft what yoke fits it
I would also like to get a higher stall toque converter about 300 rpm more
I am from GB so parts not easy to come by so info would really be great
Regards Perrie