center bore size

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Régis

Well-known member
Joined
Sep 13, 2015
Messages
74
Reaction score
2
Location
France
My Car
Mach 1 1973 Q code
Hi!!

I plan to change wheels on my 73 Mach1. The hub center bore diameter is 61.6 mm on the car. The rims i want to buy have a center bore of 83.06mm ( American Racing Wheel).

So , two questions:

Can someone confirm the original hub size is 61.6 mm for Mach 1?

If needed, where do you buy centric rings for aftermarket rims?

Thanks!!

Régis

 
I just measured one for another member do a search to find. Also the measurement will be in inches. Was not metric then. Yes you do need the bushing to support the weight of the car and center the wheel. When I am back down to garage in a bit I will measure again and if you did not get answer will post.

 
I just measured one for another member do a search to find. Also the measurement will be in inches. Was not metric then. Yes you do need the bushing to support the weight of the car and center the wheel. When I am back down to garage in a bit I will measure again and if you did not get answer will post.
Thank you very much!!!

 
Back
Top