blackford
Member
- Joined
- Jan 13, 2016
- Messages
- 20
- Reaction score
- 0
- Location
- Anaheim Hills, CA
- My Car
- Owner of Pacific Thunder Performance Engineering. Maker of suspension, chassis and steering parts for all vintage mustangs. Have 65 FB mustang fully restomodded with 331 and T5z drivetrain
I built a prototype "Strut Arm" a while back as some of you may know. Got around to building a second prototype Strut Arm and installed the prototypes on the '65. Here is a link to a write up with pics. So far they have worked out very well.
I know its a '65 and not a '71-'73, but when I get these into production, I'll be working on the design for later models that will fit '71-'73.
Combined LCA and Strut Rod units- road test success
I know its a '65 and not a '71-'73, but when I get these into production, I'll be working on the design for later models that will fit '71-'73.
Combined LCA and Strut Rod units- road test success