Complete Engine Parts List

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 29, 2012
Messages
1,582
Reaction score
8
Location
SoCal
My Car
73 Mustang Convertible
Born an I-6, spent the teenage, 20 and 30 years as a 302, but at 40 will reach full potential as a 351C.
Updated 2012-04-02


Added Oil Slinger



Added Throttle Kickdown



203 Items



351C Specific


Status: I am now adding quantity and unit of measure. As you work on your motor, please feel free to email me with additional information such as MOTOR, fastener quantity, length, and head size...We can get really down to the details and get thread size. If there is any place where every single piece is detailed out like this, I sure would like to know about it.

Please don't give me any information you are not sure of. I would rather have an empty entry then bad information.

Now we just need someone to blow up their motor so they can take it apart, and lay out their motor with all the pieces and take a picture. I would do it, but when my wife when my sees car parts, instead of seeing a fire breathing steed she sees $$$, then she sees blood, then she hunts me out. Maybe this is best left to one of the single guys, or someone who has the guts to stand up to their betrothed...

17tn6h.jpg


Thanks for helping complete this list...off to buy some parts...

james.

=======================================

I am building my motor from scratch. Not one donor part from my current motor.

As a result, I am trying to compile a complete list of parts...and I do mean complete list of parts that I need to have to put my motor together. This list is generic at this point...except for the all important bypass restrictor, most motors should share this list.

Anyone have any additions? I will edit this post with additions to prevent duplicate postings. At this point I am unable to find any engine build part listing which comes close to the detail offered here.

1 ea Air Cleaner

1 ea Air Cleaner Wing Nut

1 ea Air Cleaner Breather

1 ea Air Cleaner Modulator Vacuum Hose

1 ea Air Filter

1 ea Alternator

1 ea Alternator Belt

3 ea Alternator Mounting Bolts

1 ea Alternator Bolt Spacer

2 ea Alternator Wire Mounting Bolts

1 ea Alternator Bracket

Alternator Wire

Gal Anitfreeze

Balance Engine

1 Battery

1 Battery Ground Cable To Engine Block

1 Battery Ground Cable To Engine Block Bolt

1 Battery Positive Cable To Solenoid

Block Rebuild

1 Camshaft

Camshaft Bearings

Camshaft Bolts

1 Camshaft Rear Engine Plug

1 Camshaft Sprocket Drive

1 Camshaft Sprocket Drive Pins

Camshaft Thrust Bolts

1 Camshaft Thrust Plate

1 Carb

1 Carburetor

1 Carburetor Gasket/Spacer

1 Carburetor Choke Wire-Electric Choke

4 Carburetor Nuts

4 Carburetor Studs

1 Coil

1 Coil Mounting Bracket

1 Coil Mounting Bracket to Engine Bolt

1 Coil Wire From Ignition

Connecting Rod Nuts

1 Coolant Overflow Tank

1 Cooling System Bypass Hose At Water Pump

1 Cooling System Bypass Orifice

2 Cooling System Bypass Hose Clamps

1 Crankshaft

Crankshaft Bearings

1 Crankshaft Pulley

4 Crankshaft Pulley Bolts

1 Crankshaft Woodruff Key

Damper Bolt

1 Damper Rebuilt/New

1 Dipstick

1 Dipstick Bolt

1 Dipstick Tube

1 Distributor

1 Distributor Condensor

1 Distributor Points

1 Distributor Clamp Bolt

1 Distributor Cap

1 Distributor Clamp

1 Distributor Rotor

1 Distributor Wire To Coil(-)

1 Diverter Valve- Cooling System

1 Engine Block

Engine Freeze Plugs

1 Engine Coolant Drain Plug

1 Engine Ground Strap

Exhaust

Exhaust Header Bolts

Exhaust Header Gasket

Exhaust Headers

Exhaust Manifold/Headers

Exhaust Manifold/Headers- Coating

Exhaust Mufflers

Exhaust Pipes

Exhaust Pipe Hangers

Exhaust System

Exhaust Tips

Exhuast Manifold Bolts

1 Fan

4 Fan Bolts

1 Fan Shroud

1 Fan Spacer With Bolts

1 Flywheel

1 Flywheel Cover

1 Fuel Filter

5 Fuel Line Clamps(2@Pump,2@Filter, 1@Carb

1 Fuel Line From Fuel Pump To Fuel Filter

1 Fuel Line From Fuel Filter To Carb

1 Fuel Pump

1 Fuel Pump Gasket

2 Fuel Pump Bolts

2 Heads

2 Head Gaskets

Head Rebuild

16 Head Rebuild- 7/16 Rocker Arm Studs

Head Bolts

Head To Block Dowels

2 Heater Hose

4 Heater Hose Clamps

1 Heater Hose Fitting, Out of Engine

1 Hood

4 Hood To Hinge Mounting Bolts

1 Ignition Module

1 Ignition Module Case

2 Ignition Module Case Mounting Screws

2 Ignition Module Mounting Screws

8 Ignition Wires

6 Ignition Wire Clamps/Stand Offs/Separators

1 Intake Manifold

1 Intake Manifold Gaskets

Intake Manifold Bolts

1 Intake Manifold Vacuum Tee/Plug At Thermostat

2 Lift Hooks

4 Lift Hook Bolts

16 Lifters

1 Manifold Vacuum Tree

Motor- See Engine Block

1 Motor Mount- Driver

4 Motor Mount Engine Bolts

1 Motor Mount Passenger

2 Motor Mount Pivot Bolt

4 Motor Mounts Frame Bolts

1 Oil Filter

1 Oil Pan

1 Oil Pan Drain Plug

Oil Pan Bolts

1 Oil Pan Gasket

1 Oil Pump

1 Oil Pump Pickup

1 Oil Pump Driveshaft

Oil Pump Bolts

1 Oil Sender

1 Oil Sender Wire

1 Oil Slinger

1 Overflow Tank Mounting Bolt

1 Overflow Tube

1 Paint- Corporate Ford Blue, Engine Block/heads

1 Paint- Gloss Black, Brackets, Power Steering Pump, Radiator

1 Paint- Satin Black, Engine Bay

8 Pistons

1 Power Steering Pump Belt

3 Power Steering Pump Bolts

1 Power Steering Pump Bracket

1 Power Steering Pump

1 Power Steering Pump Spacer

16 Pushrods

1 Radiator

1 Radiator Cap

4 Radiator Hose Clamps

1 Radiator Hose Lower

1 Radiator Hose Upper

1 Radiator Mounting Bracket Top

1 Radiator Mounting Bracket Bottom

Radiator Mounting Bolts

Radiator Mounting Rubber

24 Piston Rings

16 Rocker Arm Studs

16 Roller Rockers

2 Solenoid Wire Hold Down Nuts

2 Solenoid Mounting Bolts

8 Spark Plugs

1 Starter

1 Starter 12v+ Cable To Solenoid

2 Starter Bolts

1 Thermostat

1 Thermostat Gasket

1 Thermostat Housing

2 Thermostat Housing Bolts

1 Throttle Cable

1 Throttle Cable Bracket

2 Throttle Cable Bracket Bolts

2 Throttle Cable Return Springs

1 Throttle Kick Down Lever Attachment

1 Timing Chain

1 Timing Chain Key

Timing Cover?

1 Timing Indicator

1 Timing Indicator Bolt

Vacuum Hose Plugs

1 Vacuum Hose- Distributor

1 Vacuum Distribution Tee At Firewall, Motor Center

1 Vacuum Hose- Power Brake

2 Valve Cover

16 Valve Cover Bolts

2 Valve Cover Gasket

1 Valve Cover PCV Valve

1 Valve Cover PCV Valve Grommet

1 Valve Cover PCV Valve Hose

1 Valve Cover Breather

1 Valve Cover Breather Hose

1 Valve Cover Breather Grommet

16 Valve Spring Shims

16 Valve Springs

1 Voltage Regulator

1 Voltage Regulator Condensor(Mounts On VR Mounting Bolt)

Voltage Regulator Mounting Bolts

1 Water Pump

Water Pump Bolts

1 Water Pump Gasket

1 Water Temperature Sender

1 Water Temperature Sender Wire

 
Last edited by a moderator:
You forgot 'canooter valve,' and 'muffler bearings.' :D :D :D
I am not that Polish...Actually I did forget exhaust pipe hangers, so chock one up for you.

 
C'mon, Polish, really?? Flashback to the '60's, James.... :dodgy: :huh:

Well, you've got 161 parts listed. And judging from your note about your rebuild, you pay close attention to detail. What is the purpose of a detailed list of parts for your Cleveland? I'm still in the process of assembling mine, and I'll have to take a look at each baggie that I have left to see if it matches your list.

Doc

 
What is the purpose of a detailed list of parts for your Cleveland?
You remember that guy Murphy? If anything can go wrong it will? He made his money with all those sayings by observing my life.

My genomic makeup contains an extremely anal Industrial Engineer gene. Industrial engineers get to layout plants, factory operations, operating procedures, etc. It is amazing how the lack of 3/8-16x3" bolt can stop a $25M assembly line, or a piece of insulation tape that is 300V instead of 600V can cause the disassembly and rebuild of an electrical module.

I don't want to be stuck at 11:30PM on a Saturday night and not be able to put in my cooling system because I forgot the all import fix for the 351C bypass valve...or something similar...ugh.

 
Got it. Honestly, I respect your method. Taking many pictures and, when necessary, videos will help a lot, too. Sadly, I've already come across unnamed screws and bolts due to just not paying attention. Having a complete list to refer to will put you miles ahead if something comes up, as in my case. :(

Doc

 
Carb spacer or gasket. All the other gaskets accounted for...I didn't check.
Added Carb, Fuel Pump, and Thermostat Gasket.

Isn't there a "cork" gasket for the oil pan, and then a rubber one for the front? I think that is how the 351W was.

And for the intake, is there a rubber gasket in the back?

 
I always throw away the intake gaskets and make my own...at least I do on the Windsor engines. I've never cracked open a Cleveland (yet).

 
Since you are trying to do a "compete" list, I bounced your list off my list of parts for my 545 and noted the following additions:

Plug Wires

Plug Wire Clamps

Condenser

Oil Pan Pickup

Oil Pump Driveshaft

Engine Ground Strap

Core Plugs

I also have some additional parts related to my Mechanical Roller Camshaft which you probably would not need, unless you are going to a roller.

Hope this helps!

BT

 
Carb spacer or gasket. All the other gaskets accounted for...I didn't check.
Added Carb, Fuel Pump, and Thermostat Gasket.

Isn't there a "cork" gasket for the oil pan, and then a rubber one for the front? I think that is how the 351W was.

And for the intake, is there a rubber gasket in the back?
Yep, cork for the oil pan but NO rubber gasket for the intake. RTV sealant only (other colors are available besides the red/orange that I used...:-/ )

Engine with brackets.JPG

Doc

 
Plug Wires

Plug Wire Clamps

Condenser

Oil Pan Pickup

Oil Pump Driveshaft

Engine Ground Strap

Core Plugs
Added...irritated I forget core plugs. Thought of the engine drain plug.

What are the 2 mounting points for the engine ground strap? I don't remember one on the windsor...is it a mesh wire or a 2 gage?

 
Last edited by a moderator:
Plug Wires

Plug Wire Clamps

Condenser

Oil Pan Pickup

Oil Pump Driveshaft

Engine Ground Strap

Core Plugs
Added...irritated I forget core plugs. Thought of the engine drain plug.

What are the 2 mounting points for the engine ground strap? I don't remember one on the windsor...is it a mesh wire or a 2 gage?
Mesh wire ground strap on my 73 Cleveland... gotta look for mounting point later.

 
Mesh wire ground strap on my 73 Cleveland... gotta look for mounting point later.
Actually, I think the ground strap is not to ground the engine, but to provide a ground to the frame.

The block is grounded with a cable from the battery(as seen in prior post).

 
Back
Top