Door glass popping out at speed

7173Mustangs.com

Help Support 7173Mustangs.com:

JJU9507

Well-known member
Joined
Feb 25, 2012
Messages
103
Reaction score
34
Location
corona ca
My Car
1971 mach 1 auto, 507 bbf, alum heads ect.
Got new a/c flowing, pressurized interior now causing tops of door glass to tilt out of weatherstrip. I am missing roof rail channel glass clips causing it. Any pics or advice on exactly were to mount new clips??
 
Joined
Apr 25, 2020
Messages
305
Reaction score
142
Location
NJ
My Car
73 Mach 1, Q code, 4 speed, fully optioned
Pressure relief is normally provided via the black triangular vents in the "B" pillar below each door latch. These let pressurized interior air into the rear quarters with that air then escaping out through openings in the trunk lid back edge seam, and out drain holes in the trunk floor drop off lowest point. Check that the relief vents are working and that the air exits in the truck area are not blocked or clogged.
 
Joined
Feb 3, 2022
Messages
149
Reaction score
90
Location
Minnesota
My Car
B1
I’ve dealt with this problem. My fix was to read up on the correct way to mount the window panes and regulators into the door or body. Mine did the same thing yours are doing, and if you were outside of the car with windows up and pushed inward on the top of the window, mine would actually move inward and seat in the correct groove of the weather strip seal, indicating to me they weren’t installed correctly.
A shop manual describes the process for installing and adjusting the windows. It’s easy and works.

Good luck
 
Joined
Apr 25, 2020
Messages
305
Reaction score
142
Location
NJ
My Car
73 Mach 1, Q code, 4 speed, fully optioned
A correction about what I wrote about pressure relief above. Air entering the passenger cabin via the cowl (heater or AC fresh, not recirculate mode) creates a slight increase in cabin pressure. The air coming in displaces air already in the cabin. The cabin air is forced into the rear quarter panel areas and the trunk as the cabin is deliberately not sealed off to prevent that. The air forced into the quarter panel trunk space is forced out the "B" pillar triangular vents located below the door latches, then out around the gaps between the door and body. If those vents are faulty or the cabin was sealed off from the quarters and trunk the incoming air has to force the existing air out somewhere else such as around the side windows.
 

Aus73Mach1

Well-known member
Joined
Aug 5, 2019
Messages
160
Reaction score
132
Location
QLD Australia
My Car
1973 Mach 1 Sports Roof.
Q code. 351-4V
C6 Auto, 3.25 Rear Axle, AC, Power steering.
Got new a/c flowing, pressurized interior now causing tops of door glass to tilt out of weatherstrip. I am missing roof rail channel glass clips causing it. Any pics or advice on exactly were to mount new clips??
Do the chrome trims gave these clips?

20230421_095120.jpg

These are to keep the window glass in when fully wound up.
 

JJU9507

Well-known member
Joined
Feb 25, 2012
Messages
103
Reaction score
34
Location
corona ca
My Car
1971 mach 1 auto, 507 bbf, alum heads ect.
Yes, those are the clips! Man, I totally forgot, I bought ford repair manual set last year!! I forget my own name sometimes!!
 

Latest posts

Top