Drivers remote mirror disassembly

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 8, 2019
Messages
748
Reaction score
270
Location
Missouri
My Car
1971 Mustang Convertible
1971 Mustang Mach I
1972 Mexican GT-351
1971 Mustang Convertible
1988 Bronco II
1970 Torino 4 door
I have two remote mirrors. One has a decent knob and mirror housing but the mount to the door is messed up. The other has a dent in the housing and the knob is broken but the mount piece is excellent. Soooo....I want to take them apart and make one good one. I think disassembly would go as follows. Carefully pry the clamp/knob housing at clamp to the three cables (using an appropriately sized screwdriver. Compress the knob spring straight down in a vise with protection on the jaws and use a small punch to finagle the cable ends out from the knob. Do this three times (will need to move adjuster assembly in the vise to get to all of them). Reverse to reassemble. I will bead blast the parts in between. It appears ford painted the housings prior to making the assembly since the entire inside of the mirror housing is body color on my passenger mirror. I thought I saw a thread on this somewhere but could not find it. Any help or ideas appreciated. Drivers mirror appears to have been repainted

15995155671711482352916191503122.jpg

20200907_163501.jpg

20200907_162037.jpg

15995157644873965113446851444100.jpg

 
Color code your cables and the housing to ensure you get them back in the right slots.   In the past,  I've been able to carefully spread the slot opening with tip of small screwdriver (just enough to fit cable) & pull the cables out.

 
Back
Top