EFI

Help Support 7173Mustangs.com:

Moose

New member
Joined
Sep 20, 2017
Messages
4
Reaction score
0
Location
ohio
My Car
1971 Mach 1
I have started a EFI conversion on my 71 Mach 1, Motor is a 351 w original 351 c M code ,Windsor was in when I bought it. Mild build up Gt40-p heads jba shorty headers , Ok this is what I went with FI tech Go port system they supplied complete kit minus the distributor and pressure regulator. Fuel pump will be there Hyper fuel in tank pump,Not using there pulse width modulation plan on using relay cuts down the load on the controller ,They say that it can control up to 15amp pump load. Anyone have any experience installing one of these especially the pump Plan on placing it where the top tank vent is now. any comments will be helpful pump has a vent port.

 

vozaday

VIP Members
Joined
Feb 2, 2016
Messages
318
Reaction score
1
Location
Alberta
My Car
71 Mustang 351C C6
I didnt install an in tank pump but on youtube check out Autoedit and his mustang build. In one of his more recent videos he cut the top of the tank and installed a pump. Made it look quite easy.

 

stormy69

Active member
Joined
Mar 5, 2018
Messages
39
Reaction score
0
Location
MHAFB, Idaho
My Car
73 Mach 1, 351 2V, FMX Medium Copper Metallic with White Knit Vinyl Interior.
what head3rs are you using and any issues with the p heads and header choice?

 

Moose

New member
Joined
Sep 20, 2017
Messages
4
Reaction score
0
Location
ohio
My Car
1971 Mach 1
what head3rs are you using and any issues with the p heads and header choice?
JBA headers , Had to use ceramic boots on plug wires ,Plugs are a little hard to get to.You need to use plugs for an 98 explorer .

 

Latest posts

Top