goforbroke
Member
- Joined
- Dec 14, 2017
- Messages
- 17
- Reaction score
- 1
- Location
- Sacramento, CA
- My Car
- 1973 Mustang Grande, Light Pewter
351C H code w/FMX transmission.
23k original miles
Good Morning,
A few years back I inherited a 73 Mustang Grande in near showroom condition with 23k miles on the clock. A few weeks ago I set out to get it road worthy (it still had the 40 year old Good Year tires on it), tune it up, fresh gas, ect, ect. Its always been fired up every couple of months, but never idled really well. Long story short, I pulled off the EGR spacer when I went to rebuilt the carb, and it was completely rotted out, and had seized to one of the carb studs. I'm trying to keep the car as original as possible, and would like to replace the spacer with a new one, or a good condition used one. Anyone have any ideas on where to source some nos? Thanks.
A few years back I inherited a 73 Mustang Grande in near showroom condition with 23k miles on the clock. A few weeks ago I set out to get it road worthy (it still had the 40 year old Good Year tires on it), tune it up, fresh gas, ect, ect. Its always been fired up every couple of months, but never idled really well. Long story short, I pulled off the EGR spacer when I went to rebuilt the carb, and it was completely rotted out, and had seized to one of the carb studs. I'm trying to keep the car as original as possible, and would like to replace the spacer with a new one, or a good condition used one. Anyone have any ideas on where to source some nos? Thanks.