Floor patch

Help Support 7173Mustangs.com:

6972boss

Well-known member
Joined
Jun 12, 2016
Messages
301
Reaction score
13
Location
Gig harbor Wa
My Car
72 sport roof R code waiting to be finished. 67 and 69 shelby's are ahead of it.
Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter. I need to patch this section.

Thanks, Rob

 
Last edited by a moderator:

N2odart

Active member
Joined
Nov 28, 2016
Messages
34
Reaction score
1
Location
Camby Indiana
My Car
1971 Mach 1, 1998 Cobra drivetrain
1972 R code
1973 Mach 1, Cleveland, auto
317/371/2668 text me a pic of what you need, getting ready to cut up the floor of a 73 Q code. Dave

 

Motorcity Mustang

Motorcity Mustang
Joined
Aug 27, 2010
Messages
1,508
Reaction score
88
Location
Canton, MIchigan
My Car
1971 429 CJs: Grabber Lime, Grabber Blue, White, Dark Green Metallic (2), Pewter, Red Convertible 1972: Sprints (3), 1973: Pink Convertible (2)
If N2odart isn't able to cut one out for some reason, just let me know. I have one already cut out that I was going to use for myself.

Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter. I need to patch this section.

Thanks, Rob
 

6972boss

Well-known member
Joined
Jun 12, 2016
Messages
301
Reaction score
13
Location
Gig harbor Wa
My Car
72 sport roof R code waiting to be finished. 67 and 69 shelby's are ahead of it.
If N2odart isn't able to cut one out for some reason, just let me know. I have one already cut out that I was going to use for myself.

Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter. I need to patch this section.

Thanks, Rob
I will let you know. He has been very helpful so far.

Thank you!

 

N2odart

Active member
Joined
Nov 28, 2016
Messages
34
Reaction score
1
Location
Camby Indiana
My Car
1971 Mach 1, 1998 Cobra drivetrain
1972 R code
1973 Mach 1, Cleveland, auto
I'll have your patch out tomorrow evening, I cut the patch pretty big and I'm thinking the transmission has to come out before I go through the frame part that the trans mount bolts to.

 

6972boss

Well-known member
Joined
Jun 12, 2016
Messages
301
Reaction score
13
Location
Gig harbor Wa
My Car
72 sport roof R code waiting to be finished. 67 and 69 shelby's are ahead of it.
I'll have your patch out tomorrow evening, I cut the patch pretty big and rI'm thinking the transmission has to come out before I go through the frame part that the trans mount bolts to.
Thank Dave! No rush, no worries::thumb::

 

6972boss

Well-known member
Joined
Jun 12, 2016
Messages
301
Reaction score
13
Location
Gig harbor Wa
My Car
72 sport roof R code waiting to be finished. 67 and 69 shelby's are ahead of it.
If N2odart isn't able to cut one out for some reason, just let me know.  I have one already cut out that I was going to use for myself.  

Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter.  I need to patch this section.

Thanks, Rob
Hi, well after a long wait, he did not come through. Do you still have the floor patch for the trans tunnel available? I also am in need of a section of floor for the right front floorboard, from the frame rail to the rocker. Also need a 15/16 front sway bar, ginger belts for the front and shoulder 72/73, drivers side upper door hinge plates with bolts and a drivers seat  :D 

Any help is greatly appreciated!

Thanks,

Rob

 
Last edited by a moderator:

Bentworker

VIP Members
Joined
Jan 17, 2015
Messages
1,469
Reaction score
181
Location
California
My Car
71' Grande project.
If the floorpan is the same reguardless of transmission I can cut the patch out of my 73' coupe parts car.

Let me know by PM. It had an FMX

 

Motorcity Mustang

Motorcity Mustang
Joined
Aug 27, 2010
Messages
1,508
Reaction score
88
Location
Canton, MIchigan
My Car
1971 429 CJs: Grabber Lime, Grabber Blue, White, Dark Green Metallic (2), Pewter, Red Convertible 1972: Sprints (3), 1973: Pink Convertible (2)
If N2odart isn't able to cut one out for some reason, just let me know.  I have one already cut out that I was going to use for myself.  

Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter.  I need to patch this section.

Thanks, Rob
Hi, well after a long wait, he did not come through. Do you still have the floor patch for the trans tunnel available? I also am in need of a section of floor for the right front floorboard, from the frame rail to the rocker. Also need a 15/16 front sway bar, ginger belts for the front and shoulder 72/73, drivers side upper door hinge plates with bolts and a drivers seat  :D 

Any help is greatly appreciated!

Thanks,

Rob
Let me run down to the garage after work tomorrow and get you a picture of the ones I have cut out.  I won't have a floor pan (all my 31 parts cars are pretty rusty), but should have the upper door hinge plates, drivers seat (do you need ginger?), and will check for a 15/16 sway bar and ginger belts.

 

Motorcity Mustang

Motorcity Mustang
Joined
Aug 27, 2010
Messages
1,508
Reaction score
88
Location
Canton, MIchigan
My Car
1971 429 CJs: Grabber Lime, Grabber Blue, White, Dark Green Metallic (2), Pewter, Red Convertible 1972: Sprints (3), 1973: Pink Convertible (2)
If N2odart isn't able to cut one out for some reason, just let me know.  I have one already cut out that I was going to use for myself.  
Hi, well after a long wait, he did not come through. Do you still have the floor patch for the trans tunnel available? I also am in need of a section of floor for the right front floorboard, from the frame rail to the rocker. Also need a 15/16 front sway bar, ginger belts for the front and shoulder 72/73, drivers side upper door hinge plates with bolts and a drivers seat  :D 

Any help is greatly appreciated!

Thanks,

Rob
Let me run down to the garage after work tomorrow and get you a picture of the ones I have cut out.  I won't have a floor pan (all my 31 parts cars are pretty rusty), but should have the upper door hinge plates, drivers seat (do you need ginger?), and will check for a 15/16 sway bar and ginger belts.
Here are pictures of the tunnel, drivers seat and the upper drivers hinge plate.  I don't have a 15/15 sway bar (just the normal 3/4)), nor the ginger seatbelts, just black.

View attachment 38129

View attachment 38130

View attachment 38131

View attachment 38132

View attachment 38133

View attachment 38134

 

6972boss

Well-known member
Joined
Jun 12, 2016
Messages
301
Reaction score
13
Location
Gig harbor Wa
My Car
72 sport roof R code waiting to be finished. 67 and 69 shelby's are ahead of it.
Hi, well after a long wait, he did not come through. Do you still have the floor patch for the trans tunnel available? I also am in need of a section of floor for the right front floorboard, from the frame rail to the rocker. Also need a 15/16 front sway bar, ginger belts for the front and shoulder 72/73, drivers side upper door hinge plates with bolts and a drivers seat  :D 

Any help is greatly appreciated!

Thanks,

Rob
Let me run down to the garage after work tomorrow and get you a picture of the ones I have cut out.  I won't have a floor pan (all my 31 parts cars are pretty rusty), but should have the upper door hinge plates, drivers seat (do you need ginger?), and will check for a 15/16 sway bar and ginger belts.
Here are pictures of the tunnel, drivers seat and the upper drivers hinge plate.  I don't have a 15/15 sway bar (just the normal 3/4)), nor the ginger seatbelts, just black.
Those look perfect! Thank you! And thank you to everyone else who offered up!

 

Motorcity Mustang

Motorcity Mustang
Joined
Aug 27, 2010
Messages
1,508
Reaction score
88
Location
Canton, MIchigan
My Car
1971 429 CJs: Grabber Lime, Grabber Blue, White, Dark Green Metallic (2), Pewter, Red Convertible 1972: Sprints (3), 1973: Pink Convertible (2)
Let me run down to the garage after work tomorrow and get you a picture of the ones I have cut out.  I won't have a floor pan (all my 31 parts cars are pretty rusty), but should have the upper door hinge plates, drivers seat (do you need ginger?), and will check for a 15/16 sway bar and ginger belts.
Here are pictures of the tunnel, drivers seat and the upper drivers hinge plate.  I don't have a 15/15 sway bar (just the normal 3/4)), nor the ginger seatbelts, just black.
Those look perfect! Thank you! And thank you to everyone else who offered up!
Let me know which seat you would like and if there is a greyhound station close by.  That will be the cheapest way to ship the seat, etc.

 
Top