jamesdherman
Active member
Going to pull the front fenders tonight. Is it the same as the older mustangs, bolts on top, one in the door frame, one down below?
Front Fender Removal
- Thread starter jamesdherman
- Start date
Help Support 7173Mustangs.com:
- Joined
- Sep 30, 2010
- Messages
- 6,171
- Reaction score
- 1,140
- Location
- Mustang, OK.
- My Car
- 1972 Mach 1 Q code
2007 GT
1969 Cougar Eliminator B302
CSX 7000 Shelby Cobra FIA
2020 Edge ST
2002 F250 V10
It is a bit of a PITA. 1 at door, 2 at bottom, 5 on top, 3 to the valence and 1 brace, 2 on the core support, 4 to the headlight bucket, and side marker light socket. The splash shield can be a serious PITA so plan on removing them as well. Removing the front bumper will make it easier.MAKE SURE YOU INSTALL THE FRONT SPLASH SHIELD BEFORE YOU PUT THE FENDER ON. You can not do it after the fender is on (guess how I know). Be patient, go slow, and no beer until you are done or decide to quit for the day.
jamesdherman
Active member
Wow, that does seem excessive. Ok...no beer...what about whiskey?
Whiskey at your own risk:whistling:
Jim
Jim
