Parkka
Well-known member
- Joined
- Jan 12, 2019
- Messages
- 129
- Reaction score
- 13
- Location
- New England
- My Car
- 73 Mustang Convertible
[url=https://ibb.co/cgCFb3N][img]https://i.ibb.co/j6WMVfL/IMG-20190713-145003409.jpg[/img][/url]
Does anyone have any photos of how the gas tank seal to the filler pipe is suppose to be properly seated?
The extended portion of the seal which the pipe goes through has several waves in it and I can either extend it up the pipe as shown below where it lies flat, or double over the extreme end and tuck it back down in the hole where the pipe goes back down to the tank. The seal around the pipe would then be seated lower down the throat and more flush with the base of the seal attached to the trunk floor.
Thanks,
Dan
The extended portion of the seal which the pipe goes through has several waves in it and I can either extend it up the pipe as shown below where it lies flat, or double over the extreme end and tuck it back down in the hole where the pipe goes back down to the tank. The seal around the pipe would then be seated lower down the throat and more flush with the base of the seal attached to the trunk floor.
Thanks,
Dan