Hood scoop plugs

[OMS]

Ford only used the two outer holes to mount the plastic grilles to the bezels

 

[digithead]

remove the 5 nuts holding the scoops on. then place the cones u have up against the back of the scoops and u'll see where the 3 holes need to be to attach. mine didn't have the center one, but after drilling and taping it fit great.. remove the scoops carefully cause it's much easier to do the job.. and the scoops will go back on with the plates installed and snug the 5 nuts on.. done..

Thanks, I will pull them and take a look. duh. I just assumed they bolted on BACK side thats exposed. Never thought to remove them and look inside!