- Joined
- Feb 14, 2016
- Messages
- 524
- Reaction score
- 2
- Location
- Clover
- My Car
- 72 Mach 1, Q code 351CJ, 4 speed.
A friend gave me a solid roller cam he used in his drag car before going bigger. The cam card was lost when he moved. I called Chet Herbert cams and got the specs of the cam.
The specs are:
Part #H6H
258/270 E
685 Intake
683 Exhaust
108 lobe center
Will this work in my 460? I plan to use a stroker kit and do the recommended blending work on the heads. Per my earlier posts the heads have already been setup with screw in studs and guide plates.
It is going in my 1972 Mach 1 factory 4 speed posi car. It is a weekend cruiser car not a daily driver but I still want to pass by at least every other gas station
Thanks
Wade
The specs are:
Part #H6H
258/270 E
685 Intake
683 Exhaust
108 lobe center
Will this work in my 460? I plan to use a stroker kit and do the recommended blending work on the heads. Per my earlier posts the heads have already been setup with screw in studs and guide plates.
It is going in my 1972 Mach 1 factory 4 speed posi car. It is a weekend cruiser car not a daily driver but I still want to pass by at least every other gas station
Thanks
Wade