motorcraft 4300d

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

astikhossw

Member
Joined
May 26, 2013
Messages
21
Reaction score
0
Location
southern california
My Car
1972 mustang coupe with a 351 H.O motor set up to run NHRA stock eliminator
Hey do any of you all known if the 4300d carb. is a 750 cfm or 715 cfm carb. like ford said are is it a 605cfm.I have a D2ZF-AA would this be a 715 or 750 carb.also if anyone has a untouched Boss 351 or 351 HO with the original carb. and intake can you post a picture? And was the H.O.intake a spread bore cast iron intake.Thanks

 
Last edited by a moderator:
Here you go...carb was for...

72 351CJ Mustang (w/MT) exc/Calif.

4v 605 cfm

7/8" fuel inlet

Manual Trans

Jeff

I believe the 4300D (spreadbore) came out w/ the '71 351CJ mid yr engine & had a higher CFM (750?) than the 4300A (605CFM squarebore). 4300D also saw service on 460 engines.

 
The best information I have says 715 cfm. The 72 HO intake was aluminum. Chuck

 
Yup, 715 cfm.. 4300D was fords "autolite/motorcraft" bad boy carb of the time and quite the odd ball..I have my original 4300D still, same carb they used in 73 q codes too...Mine come with a spread bore cast iron intake that only works with a 4300D carb....Carb is in my parts room, but the intake is in storage unit thou.

 
Last edited by a moderator:
Back
Top