Name that Hose

mpbsr

VIP Members
Joined
Mar 7, 2013
Messages
1,277
Reaction score
24
Location
New Jersey
My Car
1973 Mustang Convertible (Mach I Tribute)
Everyday with "Christine" is a new adventure.

Just realized today that the hose from the air filter to the cannister is crushed and split.

Is this a special hose that can be picked up at a local auto supply or needs to be purchased from a Mustang online shop.

So, name that hose?

Thanks

IMAG0164.jpg

 
Last edited by a moderator:

OMS

Vendors
Joined
Jul 22, 2010
Messages
4,559
Reaction score
150
Location
ohio
My Car
xxx
You have enough to trim that and put it back on

You can probably run it over the brace and just fix it

It is a vent - no pressure on it

There is no correct replacement

NPD has a silver version that you can cut and paint black

Don

 

mpbsr

VIP Members
Joined
Mar 7, 2013
Messages
1,277
Reaction score
24
Location
New Jersey
My Car
1973 Mustang Convertible (Mach I Tribute)
You have enough to trim that and put it back on

You can probably run it over the brace and just fix it

It is a vent - no pressure on it

There is no correct replacement

NPD has a silver version that you can cut and paint black

Don
Thanks for the info.

Did the 2 cuts and all is well.

Thanks again.

 
Last edited by a moderator:

judge

VIP Members
Joined
Nov 12, 2013
Messages
773
Reaction score
4
Location
Yorktown, Va
My Car
1973 Sports roof with 3/4 vinyl top. Concourse.
I've seen the black ones at Carlisle all ford. I believe the Boss parts guy sells them. Usually run 20.00. I'll try to find the phone number. The name of the vendor was Semo Mustang. I've seen their parts on eBay.

 
Last edited by a moderator:

will e

VIP Members
Site Supporters
Joined
May 28, 2011
Messages
3,593
Reaction score
26
Location
Phoenix
My Car
'73 mustang convt.
I would name it Phil. Or maybe Surge.

 
Joined
Jan 7, 2015
Messages
8,032
Reaction score
481
Location
Western North Carolina
My Car
Multiple Mustangs!
Like Don suggests trim and run over the brace. I do not know how the MCA judges look at it but my original one owner Mach 1 has the hose going over the brace and never been changed, see pic. I can't see the guys on the assembly line going to the trouble to run it under unless the brace was put on after the hose. This is how mine has always been.

David

100_2214.JPG

 

mpbsr

VIP Members
Joined
Mar 7, 2013
Messages
1,277
Reaction score
24
Location
New Jersey
My Car
1973 Mustang Convertible (Mach I Tribute)
Like Don suggests trim and run over the brace. I do not know how the MCA judges look at it but my original one owner Mach 1 has the hose going over the brace and never been changed, see pic. I can't see the guys on the assembly line going to the trouble to run it under unless the brace was put on after the hose. This is how mine has always been.

David
See Post #4..I did the trim it's fine.

Thanks

 

Latest posts

Top