need a good kick in the throttle

7173Mustangs.com

Help Support 7173Mustangs.com:

boilermaster

Well-known member
Joined
Feb 19, 2015
Messages
456
Reaction score
89
Location
michigan
My Car
71 fastback
I am looking for a throttle kicker solenoid/ac kicker solenoid to fit Holley bracket # 20-72 for a Brawler carb with their universal linkage.
This solenoid needs to have 3/8-24 thread, the larger threaded Holley solenoid will not work.
I have this set-up on my 770 brawler and it works quite well (with a little modification) I cannot find a part number on the solenoid I have, or the box that it came in.
My neighbor wants me to help him install an anti-diesel solenoid on his fresh 427 side oiler Fairlane project.
 

Hemikiller

Well-known member
Staff member
7173 Mustang Supporter Member
Moderator
Joined
Jul 12, 2010
Messages
3,777
Reaction score
1,041
Location
Killingworth, CT
My Car
71 Mach 1
65 coupe
This might help - idle stop solenoid is what they usually go by.

 

boilermaster

Well-known member
Joined
Feb 19, 2015
Messages
456
Reaction score
89
Location
michigan
My Car
71 fastback
Thanks Chuck, exactly what I want.
I spent about an hour on ebay this AM and did not find that one.
 
Joined
Apr 24, 2020
Messages
356
Reaction score
223
Location
Pittsford, NY
My Car
My all time favorite vehicle is our 1969 Shelby GT500
The base part numbers for the Throttle Position Solenoid, also called the Idle Stop Solenoid, is:

D2AZ-9D856

If you Google that you will find all kinds of different places, and suffix values or different versions.

You can also Google:

holley throttle position solenoid

Some folks call this a Dashpot. It isn't. A Dashpot is designed to slow down how quickly the throttle blades snap shut when the throttle is released by the driver (it acts only at the far end of the throttle travel near the idle position). I have seen them called Electric Dashpots also (equally incorrect).
 
Top